single joint universal coupling shaft U cardan joints
1. Application to all kinds of general mechanical situation, such as multiaxle drilling machine ,construction machine,packaging machine,automobile.parking facility and paper machine, maximum rotates speed may reach 800~1000r/min.2.Nominal torque 11.2-1120N.m.3. Suitable for connect two axis angle β≤45°on the same plane.4. Provides th efast locking arrangment that only has finshed product hole with the tolerance of H7. Standard spline or hexagonal hole or keyway is available.
5. The angle between two axes is allowed change in a limited range when the work requirements6. We have two kinds, with sliding bearing and with needle bearing, can be chosen as customer request. Needle bearing with high dynamic load and small bearing clearance, maximum speed can reach 4000rpm, sliding bearing maximum speed can reach 1000rpm.
When using Jacton Industrycouplings, you must follow these instructions and take the following precautions. Failureto do so may cause the power transmission product to break and parts to be thrown with sufficient force tocause severe injury or death.
Refer to this Jacton Industry performance tablesfor proper selection, sizing, horsepower, torque range, and speed rangeof power transmission products, including elastomeric elements for couplings. Follow the installationinstructions included with the product, and in the individual coupling performance tablesfor proper installation of powertransmission products. Do not exceed performance tablesratings.
During start up and operation of power transmission product, avoid sudden shock loads. Coupling assemblyshould operate quietly and smoothly. If coupling assembly vibrates or makes beating sound, shut downimmediately, and recheck alignment. Shortly after initial operation and periodically thereafter, whereapplicable, inspect coupling assembly for: alignment, wear of elastomeric element, bolt torques, and flexingelements for signs of fatigue. Do not operate coupling assembly if alignment is improper, or where applicable,if elastomeric element is damaged, or worn to less than 75% of its original thickness.
Do not use any of these power transmission products for elevators, man lifts, or other devices that carrypeople. If the power transmission product fails, the lift device could fall resulting in severe injury or death.
For all power transmission products, do not start power transmission product beforesuitable guards are in place. Failure to properly guard these products may result in severe injury or deathfrom personnel contacting moving parts or from parts being thrown from assembly in the event the powertransmission product fails.
1. Ocean freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price terms EXW, CRF etc.
3. Air Express: DHL, FEDEX, UPS, TNT.
Packaging: Strong Exporting Plywood Cases (International Exporting Standard Wooden Material with Free Fumigation).
Clients In American Countries: United States, Mexico, Canada, Chile, Bolivia, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.Clients In European Countries: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.Clients In Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, Taiwan, Sri Lanka, Israel, Jordan, Kuwait, Qatar.Clients In Oceanian Countries: Australia, New Zealand, Fiji.Clients In African Countries: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania.
1. South Africa rail wagons projects.2. Mexico, Brazil and United States bolted tank lifting projects.3. Australia and France theater stage and orchestra pit lift platform projects.4. Russia, Australia and United States hydro projects or power station projects.5. United Arab Emirates and Pakistan airport projects.6. Spain and Canada solar tracking projects.7. Malaysia and United States satellite dish projects.8. United States, Netherlands, Thailand and Indonesia food industries production lines.9. Iran steel industries production lines.10. United Kingdom and Thailand continuous PU panel production lines etc.