TF Variety Flanges
Model TF flanges are created from exactly the same high-strength cast iron as the S flanges, but are built to accommodate the global regular Taper Lock bushing for uncomplicated installation and elimination
TF Kind flanges enable for mounting the bushing on the front (hub) side on the flange
TF flanges can be found in sizes six through sixteen and can be applied with any style of sleeve as pictured on page SF-5
TR Type Flanges
TR flanges are comparable on the TF type, but allow for the Taper Lock Bushing to be mounted and eliminated from
the reverse or serration side on the flange
The limited torque ratings from the Taper Lock Bushings make it possible for TR flanges to only be made use of with EPDM or Neoprene sleeves
Various bushing sizes are employed, so they have distinctive greatest bores compared to the TF flanges
Sizes six as a result of sixteen can be found
Taper-Lock Bushings
The field standard taper lock bushing is often a split layout making it possible for a compression match with the flange on the shaft without set screws
The uncomplicated style tends to make the set up and elimination easy though the 8° taper grips tight and delivers fantastic concentricity
A Reduced degree of stock might be accomplished due to the many other energy transmission components that use Taper Lock Bushings including: sheaves, sprockets, and pulleys
does not offer you the Taper-Lock Bushings themselves as they’re widely out there from other manufacturers