DC MOTOR PUMP GROUP one
Common Description
Consisting of the hefty duty DC motor and the CB1S gear pump, this pump motor group is surely an excellent hydraulic energy unit for mobile hydraulic equipments, such as automobile carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP 2
General Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP 3
Common Description
This motor pump consists of a 4.5″ DC motor along with a CBSR gear pump which has a common electrical power up/gravity down circuit by using a relief valve, a examine valve as well as a solenoid release valve.
Exclusive Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean each of the hydraulic components concerned prior to mounting the power unit.
three. Viscosity of your hydraulic oil shoud be 15~68 cst, which ought to also be clean and free of charge of impurities. N46 hydraulic oil is recommended.
4. The power unit ought to be mounted horizontally.
five. The relief valve stress is preset about 25% greater than the working stress.
6. Flow handle valve for lowing velocity adjustment is available unpon request.
