Product Description
Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc CZPT Flex Rigid Drive Shaft NM yox Fluid Jaw Flexible Chain Gear Couplings
Manufacturer of Couplings, Fluid Coupling, JAW Coupling, can interchange and replacement of lovejoy coupling and so on.
A coupling can interchange and replacement of lovejoy coupling is a device used to connect 2 shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join 2 pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.
Coupling is a jaw type coupling that works for a variety of light duty to heavy duty motors used in electric power transmission.
This is 1 of our safest types of products. The reason being that these couplings work even when the elastomer fails and there is no metal to metal contact.
They perform in well-standing oil, grease, moisture, sand, and dirt and nearly 850,000 bore combinations that can be customised as per the customer’s needs.
They are used in light-weight, medium, or heavy electrical motors and devices for power transmission through internal combustion.
Production workshop:
Company information:
Recent Technological Advancements in Cardan Coupling Design
In recent years, there have been notable advancements and innovations in the design of cardan couplings:
- Material Enhancements: Advances in materials science have led to the development of high-strength and lightweight materials that can improve the performance and durability of cardan couplings.
- Sealing Technology: Improved sealing mechanisms and materials help prevent contamination and enhance the lifespan of cardan couplings.
- Computer-Aided Design (CAD): CAD software allows for more precise and optimized design of cardan couplings, leading to better performance and reduced stress concentrations.
- Finite Element Analysis (FEA): FEA techniques enable engineers to simulate the behavior of cardan couplings under various loads and conditions, aiding in design optimization.
- Lubrication Systems: Innovations in lubrication systems ensure efficient and consistent lubrication, reducing wear and enhancing coupling longevity.
- Monitoring and Diagnostics: Integration of sensors and monitoring systems enables real-time data collection for performance analysis, predictive maintenance, and early detection of issues.
- Customization: Advanced manufacturing techniques allow for more customization, making it possible to design cardan couplings tailored to specific applications.
These advancements contribute to the overall efficiency, reliability, and performance of cardan couplings, making them more suitable for a wide range of applications.
Handling High Torque and Axial Displacement with Cardan Couplings
Cardan couplings, also known as universal joints or u-joints, are designed to transmit torque between two shafts that are not in a straight line. They are versatile components commonly used in various applications, including those requiring high torque and axial displacement.
Handling High Torque: Cardan couplings are capable of handling high levels of torque transmission due to their robust design and construction. The design allows for torque to be transmitted through a series of interconnected components, including the cross-shaped yokes and the bearing assemblies. The use of high-strength materials and precision manufacturing techniques contributes to the coupling’s ability to transmit torque efficiently.
Handling Axial Displacement: While cardan couplings are primarily designed for accommodating angular misalignment, they can also handle a certain degree of axial displacement. Axial displacement refers to the movement of the connected shafts along their axis. However, the axial displacement capacity of a cardan coupling is limited compared to its ability to handle angular misalignment.
It’s important to note that excessive torque or axial displacement beyond the coupling’s design limits can lead to premature wear, increased vibrations, and reduced performance. Manufacturers provide specifications and guidelines for the maximum torque and axial displacement that a specific cardan coupling can handle. Engineers and designers should adhere to these specifications to ensure optimal performance and longevity of the coupling in their applications.
Factors to Consider When Selecting a Cardan Coupling for Specific Applications
Choosing the right cardan coupling for a specific application requires careful consideration of various factors:
- Torque and Power Transmission: Determine the required torque and power capacity of the coupling to ensure it can handle the intended load without exceeding its limits.
- Angular Misalignment: Assess the level of angular misalignment that might occur between the connected shafts and choose a coupling that can accommodate it without causing excessive wear or vibration.
- Operating Speed: Consider the rotational speed of the shafts to ensure that the coupling’s design can handle the desired speed without causing issues like resonance or fatigue.
- Environmental Conditions: Evaluate the operating environment, including factors like temperature, humidity, and exposure to contaminants, to select a coupling made from materials that can withstand these conditions.
- Shaft Sizes and Types: Measure the diameter and type of shafts that need to be connected and choose a coupling with compatible dimensions and attachment methods.
- Space Constraints: Consider the available space for the coupling within the machinery and select a compact design that fits without causing interference.
- Maintenance Requirements: Evaluate the maintenance practices and frequency that will be feasible for your application and choose a coupling that aligns with those requirements.
- Cost and Budget: Factor in the cost of the coupling and its potential impact on your budget while ensuring that the chosen coupling meets your performance needs.
- Shock and Vibration: Determine if the application involves high levels of shock or vibration and select a coupling that can absorb or mitigate these forces to prevent premature failure.
- Life Cycle and Reliability: Consider the expected lifespan of the machinery and choose a coupling that offers the desired level of durability and reliability.
By carefully considering these factors, you can select the most suitable cardan coupling for your specific application, ensuring optimal performance and longevity.
editor by CX 2023-08-11
Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Cast high quality roller chain China in Riga Latvia Pintle Sugar Industry Juice Strainer Chain with 4103, 4103f29, 488f2 & E2103 with ce certificate top quality low price
We – EPG Team the greatest Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
guarantees the balance and regularity of the crucial function of parts.Standard In this way, our items have continued to gain marketplace acceptance and consumers gratification over the previous couple of years.roller chain is available with pitches from 1/2 to 3 inches. Chain numbers are identified by multiplying the pitch by eighty (a 1/2 inch pitch chain would be a No. forty chain). A hyphenated suffix implies several strands. ISO 9001 accredited company of precision roller chains. Varieties consist of solitary and several strand, hollow pin, aspect bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless steel, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. sugar industry chain and EPT Chain, with alloy steel according to your necessity
one, Chain sorts: sugar sector chain, elevator conveyor chain, asphalt business chain, cerea EPT processing chain, palm oil market conveyor chain, welded metal chain, timber processing chain, bakery market chain and so on
2, Primary materials: It is 40Mn. 40Cr, 45Mn alloy steel, SUS304, and POM Plastic for plates, ten#, twenty#, 20CrMnMo, 30CrMnTi for pins and rollers
3, Heat therapy: Carburizing, Austemper Stressing, nitro-caburizing harden and so forth
four, Surface: Shot peening, black, blue or authentic
five, Deal way: Plastic bag+ carton box+ plywood scenario
We are a foremost manufacturer of mechanical transmission spare parts, as properly as several several years 1 of dependable and trustworthy sellers for European, America, Iran market etc. Our main items are roller chains, conveyor chains, transmission chain, pulleys, V-belts, sprockets, spur gears, bevel gear, equipment shafts, roller bearings, rollers, conveyor belts and so forth.
At existing, For South American, European, and Asian market, our excellent items are fabricated in accordance to your prerequisite and our top quality meets ISO, ASME, DIN stHangZhourd.
I hope we can do company collectively, and search forward to hearing from you before long
The use of first equipment manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our organization and the shown substitute parts contained herein are not sponsored, authorized, or created by the OEM.
High made in China – replacement parts – cast chain hanayama solution in Fukuoka Japan Quality Rubber Conveyor Belt for Mining with ce certificate top quality low price
We – EPG Team the greatest Chain and agricultural gearbox manufacturing facility in China with 5 various branches. For much more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
With a lot of years’ expertise in this line, we will be trustworthy by our positive aspects in competitive cost, 1-time shipping and delivery, prompt response, on-hand engineering help and good after-income services.Additionally, all our production procedures are in compliance with ISO9001 specifications. ISO Our merchandise are used in many fields.9001 qualified manufacturer of precision roller chains. Varieties include single and multiple strand, hollow pin, facet bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless steel, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. ISO 9001:2015 accredited maker and distributor of roller chains. Kinds of roller chains include ASME/ANSI regular chains, attachment chains, corrosion resistant chains, lube-free chains, plastic chains, free of charge-movement chains, specialty chains and British common chains. ASME/ANSI regular chains are offered in large and small pitch, double pitch and leaf variations. Roller chains are utilized in food packaging, forklift trucks, oilfield drilling, motorcycles, conveyors and energy transfer programs.
HangZhou ZHangZhoua Yongli EPT Substance Co., Ltd.
Our organization and Egypt Worldwide EPT Technology (Co., Ltd.) has accomplished the creation of the fir EPT phase of the rubber conveyor belt production plant in Cairo EPT Industrial Park, The next section of the project-conveyor belt enlargement and the manufacture of bike tires is being in design.
Our products certificated on international and domestic stHangZhourds this sort of as Germany (DIN), Australia (AS), United Kingdom (BS), Japan (JIS), South Africa (SANS), the United States (RMA) and global stHangZhourds (ISO) have been exported to Europe, Africa, Australia, Southea EPT Asia, Russia and Japan and South Korea and the Middle East
The firm relying on Sinochem and Sinochem EPT Materia EPT Screening Laboratory has robust specialized and management strength and Sturdy R&D group, We can control and ensure the quality for our customers by employing innovative laboratory products and testing approaches in tests and handle the uncooked materials, semi-finished products
We can generate all varieties of higher-toughness steel cord conveyor belting, Layered polyester nylon cloth main conveyor belting,Heat resistant belting, Abrasion resistant belting, Patterned belting, corrugated sidewall belting,bucket elevator conveyor belting, EPT flame retardant belting,entire core conveyor belting numerous certain belting rubber dam, farm animal rubber sheet and rubber Shaped parts merchandise.
Solution image
Technological Parameters
Belt kind | Cloth product | N/mm | Protect thickness(mm) | Amount of canvas levels | Human body width(mm) | Creation length(m/roll) | |
Solitary layer longitudinal tensile strength | Prime cover | Base cover | |||||
Cutton canvas conveyor belt | CC-fifty six | fifty six | one.5-12 | 1.5-10 | 2-10 | 300-4200 | two hundred-seven hundred |
Nylon conveyor belt | NN100 | one hundred | one.5-twelve | 1.5-ten | two-10 | three hundred-4200 | 200-seven-hundred |
NN150 | a hundred and fifty | 1.5-twelve | one.5-10 | two-ten | 300-4200 | two hundred-700 | |
NN200 | 200 | one.5-twelve | 1.5-10 | two-10 | three hundred-4200 | 200-seven hundred | |
NN250 | 250 | one.5-12 | one.5-10 | 2-10 | 300-4200 | two hundred-700 | |
NN300 | three hundred | one.5-twelve | 1.5-10 | two-10 | three hundred-4200 | two hundred-700 | |
NN400 | 400 | one.5-twelve | 1.5-10 | 2-10 | three hundred-4200 | 200-seven-hundred | |
NN500 | five hundred | one.5-12 | one.5-ten | 2-10 | three hundred-4200 | two hundred-700 | |
NN600 | 600 | 1.5-12 | one.5-ten | two-10 | 300-4200 | two hundred-700 | |
Polyester conveyor belt | EP-one hundred | 100 | 1.5-twelve | one.5-ten | 2-ten | 300-4200 | two hundred-seven-hundred |
EP-a hundred and fifty | a hundred and fifty | one.5-12 | 1.5-ten | two-10 | 300-4200 | 200-700 | |
EP-200 | two hundred | one.5-twelve | 1.5-10 | 2-ten | 300-4200 | two hundred-700 | |
EP-250 | 250 | one.5-twelve | one.5-ten | two-10 | 300-4200 | two hundred-seven-hundred | |
EP-300 | 300 | 1.5-12 | 1.5-10 | 2-10 | 300-4200 | two hundred-seven-hundred | |
EP-four hundred | 400 | one.5-12 | one.5-10 | two-ten | 300-4200 | 200-seven hundred | |
EP-five hundred | five hundred | one.5-12 | one.5-ten | 2-ten | three hundred-4200 | 200-seven-hundred |
Workshop
Packing
Take a look at
The use of unique equipment manufacturer’s (OEM) portion figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our business and the shown alternative areas contained herein are not sponsored, accepted, or manufactured by the OEM.
Fv made in China – replacement parts – minecraft China in Abuja Nigeria Series Fv63 Drag Alloy Cast Forged Roller Conveyor Chain with ce certificate top quality low price
We – EPG Team the largest Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches. For a lot more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
Every approach, every segment, each and every function in EPG is demanded to be carried out one particular step subsequent one more, very carefully and cautiously, from materials choice, reformation to production add-ons, from components heat therapy to automated assembly, from high quality control to item inspection and testing and from buy dealing to after revenue support.ISO With many years’ knowledge in this line, we will be trusted by our rewards in aggressive price, one-time supply, prompt response, on-hand engineering assistance and great following-sales companies.Furthermore, all our creation methods are in compliance with ISO9001 requirements. 9001 certified manufacturer of precision roller chains. Kinds incorporate single and multiple strand, hollow pin, aspect bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless steel, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. The continued growth of our ball bearings, mounted models and energy transmission product traces, together with our consideration to depth and good quality, has authorized EPG to acquire wide acceptance to a diverse consumer base. chain:FV40,FV63,FV90,FV112,FV140,FV180,FV250,FV315
Materials :carbon steel warmth remedy
surface area:shot peening and oiling prior to packing,totally free of rust
good quality inspection:examine size precision and hardness, pre-stretching soon after assembling,
package:polybag+plywood scenario
The heavy obligation roller chain is designed with extended pitch. Its pins and bushings undergo integral hardening procedure. For that reason, the product is in a position to stand up to very large load, the effect drive created although meshing with the sprocket, as well as the load strain transmitted from the roller.
Transmission chains with both the identical or different tensile power patterns are normally available with different pitches. The least pitch depends on the sprocket teeth’s needs, even though the highest pitch is typically identified by the rigidity of url plates, and many others.
To meet person requires, we provide hefty duty roller chain products with extended pitch amongst 300 and 700mm, and severe tensile energy from 588 to 5400kN. Meanwhile, items with the very same tensile energy are available with several pitch choices. Varied with pin diameter, the roller diameter alterations as effectively and the available alternatives are 125mm, 135mm, 150mm, 175mm, and 245mm.
Chain no. | Pitch P1(mm) | Diameter of roller d1(mm) | Diameter of pin d2(mm) | Inner width of internal link b1(mm) | Length of pin L(mm) | Data of sidebar | Tensile toughness Q(KN) | |||
h(mm) | h1(mm) | h2(mm) | T | |||||||
M-A1 | seven-hundred | 245 | 78 | a hundred and fifty five | 355 | 340 | 103 | 217.five | 38 | 5400 |
Chain no. | Pitch P1(mm) | Inner width of inner link b1(mm) | Diameter of roller d1(mm) | Diameter of pin d2(mm) | Data of sidebar | Tensile toughness Q(KN) | ||||
h(mm) | h1(mm) | h2(mm) | L(mm) | T(mm) | ||||||
JL60300 | 300 | sixty | a hundred twenty five | 28 | 154.five | 45 | 92 | 137 | twelve | 588 |
JL60400 | four hundred | sixty | one hundred twenty five | 28 | 154.5 | 45 | 92 | 137 | twelve | 588 |
JL60500 | 500 | sixty | 125 | 28 | 154.five | 45 | 92 | 137 | 12 | 588 |
JL90300 | 300 | sixty two | 135 | thirty | 177.five | 56 | a hundred and ten | 156 | sixteen | 882 |
JL90400 | 400 | sixty two | 135 | thirty | 177.five | 56 | one hundred ten | 156 | 16 | 882 |
JL90500 | five hundred | sixty two | 135 | thirty | 177.5 | 56 | one hundred ten | 156 | 16 | 882 |
JL90300W | 300 | 78 | one hundred thirty five | 30 | 177.five | 56 | one hundred ten | 172 | sixteen | 882 |
JL90400W | 400 | seventy eight | one hundred thirty five | thirty | 177.five | fifty six | 110 | 172 | 16 | 882 |
JL90500W | five hundred | seventy eight | 135 | 30 | 177.5 | 56 | 110 | 172 | 16 | 882 |
JL130300 | three hundred | 76 | one hundred fifty | 38.5 | 188 | sixty three | 113 | 187 | 16 | 1274 |
JL130400 | four hundred | seventy six | 150 | 38.5 | 188 | sixty three | 113 | 187 | sixteen | 1274 |
JL130500 | five hundred | seventy six | one hundred fifty | 38.5 | 188 | sixty three | 113 | 187 | 16 | 1274 |
JL130600 | 600 | seventy six | one hundred fifty | 38.five | 188 | sixty three | 113 | 187 | 16 | 1274 |
JL160400 | 400 | 85 | a hundred seventy five | 41.five | 221.five | seventy five | 134 | 198 | 119 | 1569 |
JL160500 | 500 | 85 | 175 | forty one.5 | 221.five | 75 | 134 | 198 | 19 | 1569 |
JL160600 | 600 | eighty five | a hundred seventy five | 41.five | 221.five | seventy five | 134 | 198 | 19 | 1569 |
For a lot more than 20 years, we have targeted on personalized chains.
For far more than twenty many years, We have completed hundreds of diverse types of industrial chains.
So we have a wealth of custom chain expertise.
Here are some of the varieties of the chains.
The use of authentic products manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our organization and the listed substitute areas contained herein are not sponsored, approved, or manufactured by the OEM.
OEM China in Mecca Saudi Arabia Good Quality Cast Steel Transmission Chain with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
OEM good quality ca EPT steel transmission chain
OEM ODM Custom Service as per Demand drawings
HangZhou TiHangZhouping Metal Products Co.,Ltd. is located in HangZhou,China, which is close to the freight port and airport, enjoying very convenient transportation.
Engaged in the casting industry for more than 16 years, our foundry has built up the complete production lines and quanlity control systems. We supply OEM service and exports to Germany, Japan, USA, Canada, Korea, EPT zealand, and so on. And we have been enjoying a good reputation from our customers.
Products range: Metal parts, Mechanical parts, EPT Hardware, Electric power fitting, Construction parts, Pipe Fitting, Auto parts, Valve parts, Food Machinery, Agricultural Machinery, etc.
Material: stainless steel, carbon steel,alloy steel,aluminum alloy, ductile iron, ca EPT iron , etc.
Description | CUSTOM MADE PRECISION CASTINGS |
Material |
(1)grey iron, ductile iron , pig iron (2)carbon steel, stainless steel, alloy steel (3)aluminum alloy, aluminium, A380, aluminum 6061 (4)zinc alloy ,copper, brass, bronze etc |
Standard | ISO ,DIN, AISI, ASTM, BS, JIS, etc. |
Size | Available in all sizes or as customer’s drawings |
Certification | ISO9001:2008 |
Application |
Industrial parts, EPT parts,construction parts,valve parts,train,craft,hydraulic pressure, Agriculturalmachinery, EPT hardware,Auto parts,electric power fittings,food machinery,harness fittings,tools,mining machinery parts |
Weight Range | 0.01kg-200kg |
Machining precision | ±0.01mm |
Surface Treatment | Heat Treatment, Polishing, Plating, Machining, Anodizing, shot, sand blasting, zinc plated, oxide, galvanized etc. |
Process | Lo EPT wax casting process, die casting process, sand casting process.Soluble glass casting process, silicasol casting process |
Production Application | Metal parts, Mechanical parts, EPT Hardware, Electric power fitting, Construction parts, Pipe Fitting, Hardware, Auto parts, Valve parts, Industrial parts, Agricultural machinery, Hinges, etc |
CNC and MC machining | Three coordinate measurement machine for testing. |
Service | To chart to sample production;OEM / ODM |
Packing details | Wood or carton packages as per your demands |
MOQ | 500 pieces (Small order is accepted) |
Material We can ca EPT :
Process | Casted Material |
Investment casting |
ASTMA148class80-40, ASTMA148Class80-50 A572GR60, AISI316 stainless steel,ST52, S355, GS-52.3, ASTMA48Class30B CK45, 1.7218-25CrMo4 |
Sand casting |
GGG50,GGG30, ASTMA48 class25B, 42CrMo4, C22 Ductile iron 65-45-12, AlCuMgpbF34,EN-JIS-500-7 EN1563 , EN15713-GE300 HT200, DIN17205-GS-25CrMo4 |
Die casting |
C1040, A356, A380 AISI12 |
FAQ:
1. How to contact with your company?
2 .What does your company need to submit a quotation?
Drawing or sample, together with relevant information, such as quantity, weight, material.
3. Which kind of format of the drawing?
PDF, IGS, DWG, STEP, etc
4 . What if we do not have a drawing?
We can duplicate your sample and make drawing for your confirmation.
5. How soon before I get a sample?
weeks for mold and sample, 3-7 days for express.
7.Where does your company locate?
HangZhou, China, which is famous of HangZhou Beer and Metal Parts.
8.Can I visit your company?
Yes, sure, welcome your visit anytime. We will book hotel and pick you up from airport.
9. How can we quote for you?
As our factory only supply OEM service(custom service)
Please send us enquiry by email, with all the technical drawings you have, with all of your requirements,
such as material grade, tolerance, machining demands, surface treatment, heat treatment, mechanical property requirements, etc. Our specialized engineer will check and quote for you, we would appreciate the opportunity and will respond in 3-5 working days or less.
It is also be EPT if you can provide a sample, we can also quote depends on the sample.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.