Tag Archives: gear coupling price

Honey China in Sorocaba Brazil rexnord gear coupling supplier Lobe in Chongj in Dem. People’s Republic of Korea ktr gear coupling manufacturer Pump with Good Suction and High Delivery Head with top quality lowest price

Honey China in Sorocaba Brazil rexnord gear coupling supplier Lobe in Chongj in Dem. People's Republic of Korea ktr gear coupling manufacturer Pump with Good Suction and High Delivery Head with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Brief introduction

Honey is a sweet, viscous food substance produced by bees and some related insects. Over its history as a food, the main uses of honey are in cooking, baking, desserts, such as mel i mató, as a spread on bread, as an addition to various beverages, such as tea, and as a sweetener in some commercial beverages. Honey barbecue and honey mustardare other common flavors used in sauces.

Honey processing is a simple food processing industry, and there is no stereotyped equipment. The honey room is designed according to the capacity requirement and the temperature index. Honey production line equipment includes honey tanks, storage tanks, reaction tanks, honey pipes, valves, filters and transfer pumps. YL offers its stainless steel lobe pump to transfer honey.

Why YL pump for your honey
–Non-contacting pumphead design enhances the pump’s ability to handle abrasive crystalline slurries, whilst minimising product damage.
–Low running, super low shear feeding do damage to your yogurt and keep its good taste.
–Suitable for CIP and SIP.
–Low maintenance costs with easy access to the pumphead minimising downtime, results in a reduced lifecycle cost.
–Lower power requirements than other pump technologies

Pump Working principle

The even rotation of the rotor pair creates a vacuum on the priming side of the pump, which can be defined by the direction of rotation of the drive. This vacuum draws the liquid into the pump chamber. With further rotation, the pumped medium is conveyed past the pump wall into the pressure area. Up to six chamber charges are displaced with each drive rotation depending on the rotor type. When the rotor is at a standstill, the pump seals off almost completely.

Pump Structure


Complete pump consists of bare shaft pump, coupling& shield, gear reduer with motor and baseplate. You can only have our bare shaft pump.

Pump Specifications

Model

Displace-ment

(L/r)

Speed range

(r/min)

Capacity
range
(M³/h)

Max.
Pressure

(Mpa)

Power

(Kw)

Suction

pressure

(Mpa)

Inlet

&outlet

(mm)

Max.
Viscosity

(cp)

25BV12-2

0.15

20-600

0.09-4.32

1.2

2.2

-0.02~-0.08

25

1000000

40BV12-5

0.32

20-550

0.18-7.92

1.2

4

-0.02~-0.08

40

1000000

50BV12-8

0.47

20-550

0.28-12.4

1.2

5.5

-0.02~-0.08

50

1000000

50BV12-10

0.65

20-550

0.39-17.16

1.2

7.5

-0.02~-0.08

50

1000000

65BV12-20

1.74

20-550

1.04-45.94

1.2

15

-0.02~-0.08

65

1000000

80BV12-30

2.5

20-550

1.5-66.00

1.2

22

-0.02~-0.08

80

1000000

80BV12-40

3.65

20-550

2.19-96.00

1.2

30

-0.02~-0.08

80

1000000

125BV12-50

4.6

20-420

2.76-92.74

1.2

37

-0.02~-0.08

125

1000000

125BV12-70

6.1

20-420

3.66-122.98

1.2

45

-0.02~-0.08

125

1000000

125BV12-80

7.0

20-420

4.20-141.12

1.2

55

-0.02~-0.08

125

1000000

150BV12-100

11.4

20-420

6.84-229.82

1.2

75

-0.02~-0.08

150

1000000

150BV12-150

12.5

20-420

7.50-252.00

1.2

90

-0.02~-0.08

150

1000000

175BV12-200

16.7

20-420

10.02-336.67

1.2

110

-0.02~-0.08

175

1000000

Note*

1. Tested medium: water. Your liquid’s density, viscosity and temperature are necessary to supply when choose the pump.

2. Speed, flow rate, EPT power and pressure will be varified according to different liquid properties.

3. Port size can be changed as needed.

4. YL reserves the right to change specifications without prior notification.

Pump details to show

How to choose our pump
Dear Customer,
To ensure satisfactory performance of required pumps, it is important that the pump must be properly selected. Below table is for your selection guideline, which is nessary to supply us for a targeted solution and offer. 

Selection Xihu (West Lake) Dis.line
Buyer information
Company name   Contact person  
Website   Email  
Address   Mobile No.  
Tel/Fax: 0086-571-88220971 No.   Online chat ID.  
Liquid information
Your industry: __________ Liquid name:___________ 
Features:  Sanitary[  ]   Corrosive[  ]  Poisonous[  ]
Viscosity:_______cp Density:_______ Temperature:_____ºC PH value:________
Solid content:_______    Max. size of particle:_______  
Using condition
Capacity:  Max. required:__________ L/H     Working required:__________ L/H 
Discharge pressure: Max. required:__________Mpa    Working required:__________ Mpa
Suction pressure: Max. required:__________Mpa    Working required:____________ Mpa
Delivery head required:____________  Vacuum:________ Mpa
Heating jacket required: Yes[    ] No.[     ]           Heating temp.:_____ºC 
Liquid inlet/outlet direction: Horizontal[     ]   vertical[      ]  
Pipe size: Inlet___________ Outlet____________
Connection type required: Flange[     ] Thread[     ] Clamp[     ]
Installation type: Fixed [     ] Movable[     ]
Operating status: Continuous[     ]  Interruption[     ]
Liquid contact material: SS304[     ] 316[     ] 316L[     ]         Others________
Special request_____________________________________  

Factory workshop showing


 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Honey China in Sorocaba Brazil rexnord gear coupling supplier Lobe in Chongj in Dem. People's Republic of Korea ktr gear coupling manufacturer Pump with Good Suction and High Delivery Head with top quality lowest price

Hot China in La Paz Bolivia (Plurinational State of) sier bath gear coupling factory Sale in Ulyanovsk Russian Federation elecon coupling sales 6 Cylinders 4 Stroke Water Cooling Marine Diesel Engine with top quality lowest price

Hot China in La Paz Bolivia (Plurinational State of) sier bath gear coupling factory Sale in Ulyanovsk Russian Federation elecon coupling sales 6 Cylinders 4 Stroke Water Cooling Marine Diesel Engine with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Features & Benefits
* Felxible -can be customerized according to customer’s request, drawing will be submitted for approval. Such as taking off radiator and replacing with the heat exchanging system, total power solution such as gear box coupling and canopy design.

*Durability- With  engines have been engineered to meet the durability and performance needs of construcation applications and seawater cooling options and controls seamlessly integrated to ensure the propulsion for your vessel meets your needs.

* Long-Life Expectancy – these critical parts are manufactured by leading companies, other part comes from reliable manufacturers, these sets guarantee long functional life, outstanding performance, and high efficiency.

* Easy availability of the spare parts — the key parts are same as parts for vehicle diesel engine,better exchange and universality and durable.

* Easy maintenance -Diesel engine not require heavy maintenance. It is very easy, safe, and simple to use. Well-planned and preventive maintenance measures are generally available for these sets which are also low in cost.

 Marine Engine :
 

Engine Model Cylinders Rated Output(KW) Horsepower(HP) Aspiration
4BT3.9-M 4 30-74 40-100 Turbocharged
4BTA3.9-M 4 74-102 100-140 Turbocharged
4BTA3.9-M100 4 74 100 Turbocharged
4BTA3.9-M120 4 88 120 Turbocharged
6BT5.9-M 6 59-147 80-200 Turbocharged
6BT5.9-M120 6 88 120 Turbocharged
6BT5.9-M150 6 110 150 Turbocharged
6BT5.9-M180 6 132 180 Turbocharged
6BT5.9-M200 6 147 200 Turbocharged 
6CTA8.3-M 6 138-220 188-300 Turbocharged 
6CTA8.3-M188 6 138 188 Turbocharged 
6CTA8.3-M220 6 161 220 Turbocharged
6CTA8.3-M240 6 176 240 Turbocharged
6CTA8.3-M250 6 183 250 Turbocharged
6CTA8.3-M260 6 191 260 Turbocharged
6CTA8.3-M300 6 220 300 Turbocharged
6LTAA8.9-M 6 220-275 300-375 Turbocharged
6LTAA8.9-M300 6 220 300 Turbocharged
6LTAA8.9-M315 6 231 315 Turbocharged
6LTAA8.9-M325 6 238 325 Turbocharged
6LTAA8.9-M350 6 257 350 Turbocharged
6LTAA8.9-M360 6 254 360 Turbocharged
6LTAA8.9-M375 6 275 375 Turbocharged
NT855-M 6 176-220 240-300 Turbocharged
NT855-M240 6 176 240 Turbocharged
NT855-M270 6 198 270 Turbocharged
NT855-M300 6 220 300 Turbocharged
NTA855-M 6 238-330 325-450 Turbocharged
NTA855-M325 6 238 325 Turbocharged
NTA855-M350 6 257 350 Turbocharged
NTA855-M400 6 294 400 Turbocharged
NTA855-M450 6 330 450 Turbocharged
KTA19-M500 6 367 500 Turbocharged
KTA19-M600 6 441 600 Turbocharged
KTA19-M700 6 514 700 Turbocharged
KTA38-M1000 12 735 1000 Turbocharged
KTA50-M 16 1045 1421 Turbocharged
KTA19-M 6 367-514 500-700 Turbocharged

Main Products:


Equipment test
Our company has high-speed precision punching machine,automatic mesh belt quenching furnace,automatic assembly line and other advanced equipment chain,as well as the industry’s most complete materials and chain EPT development and testing equipment,all aspects of the performance of all aspects of product testing,to meet the eligibility criteria before leaving the factory.Quality is our culture all the engine will be tested before leaving the factory we are proud to say that in our years of international trading experience,we never had a single order returned to us,For all ore clients,you will receive exactly what you ordered,and you will get it on time and we live by the principle that customer comes first.

Package
All warehouse staffs must be strict comply with the standard operating procedures for daily handing.The data of inbound & outbound must be clearly and accurately passed to the data team from inventory team timely.
The normal package is wooden box if export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Certificate
Our company specialized in diesel engine and spare parts more than 15 years and the products has passed ISO9001 and SGS international quality management system certification and be recognized to be high- EPT enterprises and High- EPT products.

Our Service
1) Quality is our culture — We are proud to say that in our years of international trading experience, we never had a single order returned to us.
2) Time is Gold — For all our clients, you will receive exactly what you ordered, and you will receive it on time
3)After sending, we will track the products for you once every two days, until you get the products. When you got the 
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer 
the solve way for you
4) Super Value — We have much cost advantage. By choosing us, you can increase profit.
5) Great Services — We live by the principle that customer comes first.
6) Sample order is accepted.
7) Your choice make different !

FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your EPT payment. The specific delivery time depends 
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Hot China in La Paz Bolivia (Plurinational State of) sier bath gear coupling factory Sale in Ulyanovsk Russian Federation elecon coupling sales 6 Cylinders 4 Stroke Water Cooling Marine Diesel Engine with top quality lowest price

6bt China in Jammu India gear coupling hub manufacturer Diesel in Ibadan Nigeria falk 1020g20 near me Motor Engine for Marine with top quality lowest price

6bt China in Jammu India gear coupling hub manufacturer Diesel in Ibadan Nigeria falk 1020g20 near me Motor Engine for Marine with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

ZheJiang Client Diesel Engine Co., Ltd can provide M11, NT/NTA-855, KT/KTA/KTTA19, KT/KTA38, KTA/KTTA 50, 4BT, 6BT, C serials engine.
The price is competitive, and the quality is original. Looking forward to your visit!

Marine Engine of Nta855 Kta19 Kta38:
 

Engine Model Cylinders Rated Output(KW) Aspiration
N855-M-195 6 145 Naturally Aspirated
N855-M-215 6 160 Naturally Aspirated
NT855-M-220 6 164 Turbocharged
NT855-M-240 6 149 Turbocharged
NT855-M-270 6 201 Turbocharged
NT855-M-300 6 224 Turbocharged
NT855-M-340 6 253 Turbocharged
NT855-M-360 6 269 Turbocharged
NTA855-M-350 6 261 Turbocharged & Intercooler
NTA855-M-380 6 283 Turbocharged & Intercooler
NTA855-M-400 6 298 Turbocharged & Intercooler
KT19-M-365 6 272 Turbocharged
KT19-M-380 6 283 Turbocharged
KT19-M-425 6 317 Turbocharged
KTA19-M-470 6 351 Turbocharged
KT19-M-510 6 380 Turbocharged
KTA19-M-500 6 373 Turbocharged&intercooler
KTA19-M-530 6 395 Turbocharged&intercooler
KTA19-M-550 6 410 Turbocharged&intercooler
KTA19-M3 6 477 Turbocharged&intercooler
KTA38 6 350 Turbocharged&intercooler
KTA38 6 780 Turbocharged&intercooler
KTA38-M0 6 559 Turbocharged&intercooler
KTA38-M1 6 671 Turbocharged&intercooler
KTA38 6 350 Turbocharged&intercooler
KTA38 6 582 Turbocharged&intercooler
KTA38 6 596 Turbocharged&intercooler
KTA38-M0 6 559 Turbocharged&intercooler
KTA38-M1 6 671 Turbocharged&intercooler
KTA38-M1 6 745 Turbocharged&intercooler
KTA38-M2 6 783 Turbocharged&intercooler
KTA38-M2 6 895 Turbocharged&intercooler
KTA38-M2 6 1007 Turbocharged&intercooler

Features & Benefits
* Felxible -can be customerized according to customer’s request, drawing will be submitted for approval. Such as taking off radiator and replacing with the heat exchanging system, total power solution such as gear box coupling and canopy design.

*Durability- With  engines have been engineered to meet the durability and performance needs of construcation applications and seawater cooling options and controls seamlessly integrated to ensure the propulsion for your vessel meets your needs.

* Long-Life Expectancy – these critical parts are manufactured by leading companies, other part comes from reliable manufacturers, these sets guarantee long functional life, outstanding performance, and high efficiency.

* Easy availability of the spare parts — the key parts are same as parts for vehicle diesel engine,better exchange and universality and durable.

* Easy maintenance -Diesel engine not require heavy maintenance. It is very easy, safe, and simple to use. Well-planned and preventive maintenance measures are generally available for these sets which are also low in cost.

Main Products:

Company Profile
As a leading manufacturer and supplier in China, we are specialized in complete engine and spare parts. Such as crankshaft, camshaft, con rod, cylinder head, cylinder block, cylinder liner, piston, piston ring, engine valve, engine bearing, oil nozzle, oil seal, oil pump, fuel pump, water pump, turbocharger, and so on 
We also supply the china products which are made by joint venture with international engine and engine parts ,for example Elring, Bosch, Payen, Federal-mogul, TP, Holset, S.Valeo, Garrett, Borg-Warner, KKK, ZF, Eaton, Fuller, GKN, Thomson products which made in China under strict quality control and international quality standards.

We aim to be a top class supplier for worldwide OEM and aftermarket!     
hope build good business relationship with all company which is do business in this field 


Equipment test
Our company has high-speed precision punching machine,automatic mesh belt quenching furnace,automatic assembly line and other advanced equipment chain,as well as the industry’s most complete materials and chain EPT development and testing equipment,all aspects of the performance of all aspects of product testing,to meet the eligibility criteria before leaving the factory.Quality is our culture all the engine will be tested before leaving the factory we are proud to say that in our years of international trading experience,we never had a single order returned to us,For all ore clients,you will receive exactly what you ordered,and you will get it on time and we live by the principle that customer comes first.

Package
All warehouse staffs must be strict comply with the standard operating procedures for daily handing.The data of inbound & outbound must be clearly and accurately passed to the data team from inventory team timely.
The normal package is wooden box if export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Certificate
Our company specialized in diesel engine and spare parts more than 15 years and the products has passed ISO9001 and SGS international quality management system certification and be recognized to be high- EPT enterprises and High- EPT products.

Our Service
1) Quality is our culture — We are proud to say that in our years of international trading experience, we never had a single order returned to us.
2) Time is Gold — For all our clients, you will receive exactly what you ordered, and you will receive it on time
3)After sending, we will track the products for you once every two days, until you get the products. When you got the 
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer 
the solve way for you
4) Super Value — We have much cost advantage. By choosing us, you can increase profit.
5) Great Services — We live by the principle that customer comes first.
6) Sample order is accepted.
7) Your choice make different !

FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your EPT payment. The specific delivery time depends 
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

6bt China in Jammu India gear coupling hub manufacturer Diesel in Ibadan Nigeria falk 1020g20 near me Motor Engine for Marine with top quality lowest price

Water China in Riyadh Saudi Arabia falk gear coupling price Cooling in Abeokuta Nigeria falk gear coupling Construction Machinery Diesel Engine with top quality lowest price

Water China in Riyadh Saudi Arabia falk gear coupling price Cooling in Abeokuta Nigeria falk gear coupling Construction Machinery Diesel Engine with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

ZheJiang Client Diesel Engine Co., Ltd can provide  4BT3.9-M, 4BTA3.9-M,6BT3.9-M,6CTA8.3-M,6LTAA8.9-M,NT855-M,NTA855-M,KTA19-M,KTA38-M,KTA50-M Marine engine. The price is competitive, and the quality is original. Looking forward to your visit!
Features & Benefits
* Felxible -can be customerized according to customer’s request, drawing will be submitted for approval. Such as taking off radiator and replacing with the heat exchanging system, total power solution such as gear box coupling and canopy design.

*Durability- With  engines have been engineered to meet the durability and performance needs of construcation applications and seawater cooling options and controls seamlessly integrated to ensure the propulsion for your vessel meets your needs.

* Long-Life Expectancy – these critical parts are manufactured by leading companies, other part comes from reliable manufacturers, these sets guarantee long functional life, outstanding performance, and high efficiency.

* Easy availability of the spare parts — the key parts are same as parts for vehicle diesel engine,better exchange and universality and durable.

* Easy maintenance -Diesel engine not require heavy maintenance. It is very easy, safe, and simple to use. Well-planned and preventive maintenance measures are generally available for these sets which are also low in cost.

Marine Engine :
 

Engine Model Cylinders Rated Output(KW) Horsepower(HP) Aspiration
4BT3.9-M 4 30-74 40-100 Turbocharged
4BTA3.9-M 4 74-102 100-140 Turbocharged
4BTA3.9-M100 4 74 100 Turbocharged
4BTA3.9-M120 4 88 120 Turbocharged
6BT5.9-M 6 59-147 80-200 Turbocharged
6BT5.9-M120 6 88 120 Turbocharged
6BT5.9-M150 6 110 150 Turbocharged
6BT5.9-M180 6 132 180 Turbocharged
6BT5.9-M200 6 147 200 Turbocharged 
6CTA8.3-M 6 138-220 188-300 Turbocharged 
6CTA8.3-M188 6 138 188 Turbocharged 
6CTA8.3-M220 6 161 220 Turbocharged
6CTA8.3-M240 6 176 240 Turbocharged
6CTA8.3-M250 6 183 250 Turbocharged
6CTA8.3-M260 6 191 260 Turbocharged
6CTA8.3-M300 6 220 300 Turbocharged
6LTAA8.9-M 6 220-275 300-375 Turbocharged
6LTAA8.9-M300 6 220 300 Turbocharged
6LTAA8.9-M315 6 231 315 Turbocharged
6LTAA8.9-M325 6 238 325 Turbocharged
6LTAA8.9-M350 6 257 350 Turbocharged
6LTAA8.9-M360 6 254 360 Turbocharged
6LTAA8.9-M375 6 275 375 Turbocharged
NT855-M 6 176-220 240-300 Turbocharged
NT855-M240 6 176 240 Turbocharged
NT855-M270 6 198 270 Turbocharged
NT855-M300 6 220 300 Turbocharged
NTA855-M 6 238-330 325-450 Turbocharged
NTA855-M325 6 238 325 Turbocharged
NTA855-M350 6 257 350 Turbocharged
NTA855-M400 6 294 400 Turbocharged
NTA855-M450 6 330 450 Turbocharged
KTA19-M500 6 367 500 Turbocharged
KTA19-M600 6 441 600 Turbocharged
KTA19-M700 6 514 700 Turbocharged
KTA38-M1000 12 735 1000 Turbocharged
KTA50-M 16 1045 1421 Turbocharged
KTA19-M 6 367-514 500-700 Turbocharged

Related Products:

Company Profile
As a leading manufacturer and supplier in China, we are specialized in complete engine and spare parts. Such as crankshaft, camshaft, con rod, cylinder head, cylinder block, cylinder liner, piston, piston ring, engine valve, engine bearing, oil nozzle, oil seal, oil pump, fuel pump, water pump, turbocharger, and so on 
our products have exported many countrys .We are also the supplier for China DEUTZ/KHD, CUMMINS, ISUZU and LOVOL as well as MTU, KKK Germany
We also supply the china products which are made by joint venture with international engine and engine parts ,for example Elring, Bosch, Payen, Federal-mogul, TP, Holset, S.Valeo, Garrett, Borg-Warner, KKK, ZF, Eaton, Fuller, GKN, Thomson products which made in China under strict quality control and international quality standards.

We aim to be a top class supplier for worldwide OEM and aftermarket!     
hope build good business relationship with all company which is do business in this field 

Equipment test
Our company has high-speed precision punching machine,automatic mesh belt quenching furnace,automatic assembly line and other advanced equipment chain,as well as the industry’s most complete materials and chain EPT development and testing equipment,all aspects of the performance of all aspects of product testing,to meet the eligibility criteria before leaving the factory.Quality is our culture all the engine will be tested before leaving the factory we are proud to say that in our years of international trading experience,we never had a single order returned to us,For all ore clients,you will receive exactly what you ordered,and you will get it on time and we live by the principle that customer comes first.

Package
All warehouse staffs must be strict comply with the standard operating procedures for daily handing.The data of inbound & outbound must be clearly and accurately passed to the data team from inventory team timely.
The normal package is wooden box if export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Certificate
Our company specialized in diesel engine and spare parts more than 15 years and the products has passed ISO9001 and SGS international quality management system certification and be recognized to be high- EPT enterprises and High- EPT products.

Our Service
1) Quality is our culture — We are proud to say that in our years of international trading experience, we never had a single order returned to us.
2) Time is Gold — For all our clients, you will receive exactly what you ordered, and you will receive it on time
3)After sending, we will track the products for you once every two days, until you get the products. When you got the 
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer 
the solve way for you
4) Super Value — We have much cost advantage. By choosing us, you can increase profit.
5) Great Services — We live by the principle that customer comes first.
6) Sample order is accepted.
7) Your choice make different !

FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your EPT payment. The specific delivery time depends 
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Water China in Riyadh Saudi Arabia falk gear coupling price Cooling in Abeokuta Nigeria falk gear coupling Construction Machinery Diesel Engine with top quality lowest price

2015 China in Anyang Republic of Korea elecon coupling near me shop Hot in Lome Togo gear coupling price Selling heavy truck trailer Oil Fuel Tank Semi Trailer, tanker with top quality lowest price

2015 China in Anyang Republic of Korea elecon coupling near me shop Hot in Lome Togo gear coupling price Selling heavy truck trailer Oil Fuel Tank Semi Trailer, tanker with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

2015 Hot Selling heavy truck trailer/ Oil Fuel Tank Semi Trailer,tanker

We are one truck refitting enterprise approved by National Ministry Of Industry and Information Of China. We can supply from 2 tons to 70 ton trucks and various semi trailers. And we can provide all of the brands truck chassis made in China. HOWO, FAW,XIHU (WEST LAKE) DIS.FENG,FOTON,SHACMAN,BEIBEN,C&C, and so on. The followed specifications are for HOWO A7. You can contact us directly and tell us you wanted brand and specifications, we’ll recommend the suitable model to you.

1. Dimension:
. Length: 12, 800 mm
Width: 2, 485 mm (including mud guard)
Height: 3, 600mm
King Pin Location: 1, 000 mm from the front face of the front bolster
Axle spacer: 7, 400mm + 1, 400mm
Fifth Wheel Height: 1, 280mm with the chassis level.
Landing Gear location: 2420mm behind the king pin location

2. Weight:
Tare weight(Tolerance 0~-4%): Approximate 10, 800KG
Pay Load: 41, 700KG
G. V. W. R: 52, 500KG
King Pin Distribution: 16, 750KG
Axle Group Distribution: 32, 950KG

3. Tank:
Volume: 35000LT + 5%, Vapor Volume for semi trailer
Three compartments: 2350L/20000L/15000L
Plus outside fitted fuel tank 2350L capacity situated inside the main tank at the front of the tank with proper inlet (16″ diameter manhole) and outlet (a ball-type discharge valve and a thread coupling, made in China, lies to roadside. ).
Tank material: Steel plate Q345A, the thickness of the shell is 5mm approx.
Dish ends and bulkhead: Dished and flanged, steel plate Q345A, thickness are 5mm approx, and baffles are 4 mm approx, steel plate Q235A.
Shape of tank: Ellipse, double “D”
Plate dealing: Outer surface paint. Color according to the customer’s requirement. Internal antistatic coating.
Test pressure designed: 36kpa.

4. Tank Accessories and fitting:
16″ diameter manhole pre compartment.
Each compartment has a 4″ foot valve, pneumatic operation.
Each compartment has a 3″ steel pipe line.
At the middle of the tank, each compartment with a 3″ ball-type discharge valve and a male coupling (To be determined), lies to roadside.

At the rear of the tank, a detachable ladder is provided.
A chequered plate walkway is installed on top of the tank made of antiskid plate.
Each compartment has a measurement ruler. According to the regulation of Chinese metrology department, the measurement ruler for fuel tanker semitrailer should be calibrated above 70% of the tank volume and below 70% the ruler doesn’t need be calibrated. From 70% to 85% of the tank volume, we can calibrated the ruler and it can reach 300 liter/step. And above 85% of the tank volume, we can make the precision of the measurement ruler reach 100 liter/step. (calibrated by CIMC)
Expansion valve: Non.
Pump is option

steel oil  tank  trailer
Overall  size 12400*2500*3700
Wheelspan 5180+1310+1310
Axle  spacing 1310
Distance  between  two  wheel 1850
Tank  size  12000*2400*1800
Material  of  tank stainless  steel
Shape  of  tank Square  round
Tare  weight: 12000kg
Pay  load 45000kg
G. V. W 57000KG
Effective  cubage 45.1m3
Plate  of  spring 8/8/8;   10/10/10
Tire  size 11.00R20  /12.00R20
Trade  iterm EXW,   FOB,   CFR,   CIF
We  can  designer  as  per  your  detailed  requirements.   We  have  rich  experience  in  this  fields.
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

2015 China in Anyang Republic of Korea elecon coupling near me shop Hot in Lome Togo gear coupling price Selling heavy truck trailer Oil Fuel Tank Semi Trailer, tanker with top quality lowest price

Single China in Mbeya United Republic of Tanzania gear coupling falk near me Stage in Durg-Bhilainagar India hydax nylon gear coupling Sand Reclamation Solid Slurry Pump with top quality lowest price

Single China in Mbeya United Republic of Tanzania gear coupling falk near me Stage in Durg-Bhilainagar India hydax nylon gear coupling Sand Reclamation Solid Slurry Pump with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

         Single Stage Sand Reclamation Solid Slurry Pump

 

Naipu® Factory of Slurry Pump, Gravel Sand Pump , Dredging Pump and Wear Spare Parts

what is slurry pump?

A slurry pump is a type of pump designed for pumping liquid containing solid particles. Slurry pumps changes in design and construction to adjust to multiple type of slurry which varies in concentration of solids, size of solid particles, shape of solid particles, and composition of solution. Slurry pump are more robust than liquid pumps; they have added sacrificial material and replaceable wear parts to withstand wear due to abrasion.

 

Single Stage Sand Reclamation Solid Slurry Pump

Main Pump Model

Metal Liner Heavy Duty Slurry Pump NAH TYPE

1.5/1B-NAH 2/1.5B-NAH 3/2CN-AH 3/2CC-NAH 4/3C-NAH 4/3CC-NAH 4/3D-NAH 4/3DD-NAH 6/4D-NAH 6/4DD-NAH 6/4E-NAH 6/4EE-NAH 8/6E-NAH 8/6EE-NAH 8/6F-NAH 8/6FF-NAH 8/6R-NAH 10/8ST-NAH 10/8F-NAH 10/8FF-NAH 12/10ST-NAH 12/10G-NAH 12/10F-NAH 12/10FF-NAH 14/12ST-NAH 14/12G-NAH 14/12FF-NAH 14/12F-NAH 16/14TU-NAH 20/18TV-NAH

Rubber Liner Heavy Duty Slurry Pump NAH TYPE 

1.5/1B-NAHR 2/1.5B-NAHR 3/2C-NAHR 3/2CC-NAHR 4/3C-NAHR 4/3CC-NAHR 4/3D-NAHR 4/3DD-NAHR 6/4D-NAHR 6/4DD-NAHR 6/4E-NAHR 6/4EE-NAHR 8/6E-NAHR 8/6EE-NAHR 8/6F-NAHR 8/6FF-NAHR 8/6R-NAHR 10/8F-NAHR 10/8X-NAHR 12/10ST-NAHR 14/12ST-NAHR 16/14TU-NAHR

Single Stage Sand Reclamation Solid Slurry Pump

6-4D-NAH Slurry Sand Pump

NP-NAH HORIZONTAL SLURRY PUMP PERFORMANCE PARAMETERS

 

Type Allowable Mating Max. Power(Kw) Clear Water Performance Impeller
Capacity/Q m³/hr Head/m Speed/rpm Max Efficiency/% NPSH/m Nos of Vane Impeller Diameter/mm
1.5X1-NP-NAH 15 12.6–28.8 6–68 1200–3800 40 2–4 5 152
2X1.5-NP-NAH 15 32.4–72 6–58 1200–3200 45 3.5–8 5 184
3X2-NP-NAH 30 39.6–86.4 12–64 1300–2700 55 4–6 5 214
4X3-NP-NAH 30 86.4–198 9–52 1000–2200 71 4–6 5 245
6X4-NP-NAH 60 162–360 12–56 800–1550 65 5–8 5 365
8X6-NP-NAH  300 360–828 10–61 500–1140 72 2–9 5 510
10X8-NP-NAH  560 612–1368 11–61 400–850 71 4–10 5 686
12X10-NP-NAH 560 936–1980 7–68 300–800 82 6 5 762
14X12-NP-NAH 560 1260–2772 13–63 300–600 77 3–10 5 965
16X14-NP-NAH 1200 1368–3060 11–63 250–550 79 4–10 5 1067
20X18-NP-NAH 1200 2520–5400 13–57 200–400 85 5–10 5  1370

Feature

Type ZJR, ZJM, ZJH Pump are cantilevered, horizontal, centrifugal slurry pump. They are designed for the handing high density slurries in the metallurgical, mining , coal, power, building material and other industrial department etc.
The frame plates liner and impeller for type ZJR , ZJ(M) pumps have replaceable wear-resistant metal liners or rubber liners.
The shaft seals for type ZJ(R),ZJM, and ZJH Pump may be adoptable of gland seal , expeller seal or Mechanical seal . The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Bearing assembly use cylindrical structure, which helps adjust the space between impeller and cover plate liner easily, and being removed completely when being repaired. Bearings use grease lubrication. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency, the pump of this type may be installed in multistage series to meet the delivery for long distance.

Pump Structure

NaiPu Main Pump Model

1. NAH, M, L , HH Horizontal Slurry Pump
2. SP Vertical Sump Pump
3. ZJQ Submersible Slurry Pump
4. G Horizontal Gravel Sand Pump
5. ZJQ Submersible sand pump
6. WS Dredging pump
7. AF, A EPT Froth Pump
8. TL(R) Desulphurization Pump
9. Clean Water Pump
10. OEM Casting machinery parts

The Main pump model of NAH HH M L SP AF G Series 
 

NAH series L(R) ,M HH SP(R) G AF Series
1.5/1B-AH(R) 20A-L 1.5/1 C-HH 40PV-SP(R) 6/4D-G 2QV-AF
2/1.5B-AH(R) 50B-L(R) 3/2D-HH 65QV-SP(R) 8/6E-G 3QV-AF
3/2C-AH(R) 75C-L 4/3E-HH 100RV-SP(R) 10/8F-G 6SV-AF
4/3C-AH(R) 100 D-L 4/3X-HH 150SV-SP(R) 10/8S-G 8SV-AF
6/4D-AH(R) 150E-L 6/4F-HH 200SV-SP 12/10G-G  
6/4E-AH(R) 300S-L 6/4X-HH 250TV-SP 14/12G-G  
8/6E-AH(R) 10/8 R-M 6S-H   14/12T-G  
8/6R-AH(R) 10/8 E-M 8/6S-H   16/14 G-G  
10/8F-AH(R)   8/6X-H   16/14TU-GH  
10/8X-AH(R)   6S-HP   16/14H-GH  
12/10ST-AH(R)   8/6S-HP   18/16G-G  
14/12ST-AH(R)   8/6X-HP   18/16 TU-GH  
16/14TU-AH(R)          
20/18G(TU)-AH(R)          

 

Slurry Pump Spare Parts

Main Spare Parts

Impeller, Volute Liner, Casing, ThroatBush, Frame Plate Liner Insert, Cover Plate, Frame Plate, Pump Liner Expeller, Expeller Ring,
Stuffing Box, Expeller, Pump Shaft, shaft sleeve, Shaft Spacer, Bearing Assembly, Base, Stuffing Box, Gland Assembly, Bearing Housing,
Lantern Ring, pump discharge pipe, flange, and so on. 

OEM Service

Naipu Pump is able to process whatever pump parts and wear parts customers require. The increasing development technology
of reverse engineering has further enabled the company to contra-derive the shape of a sample offered by clients and, with the help
of the latest 3D imaging technology to scan the pump parts, Naipu Pump can acquire accurate drawings (based on aluminum,
iron and wood model patterns) to ensure that the company’s EPT parts fit 100% onto customers’ pumps.
Naipu Pump  understands the process and demands of the mining industry and can offer comprehensive 
services tailored to customers’ needs.

The material can be high chrome alloy Cr27% , Stainless steel, Alloy ,   Hastelloy and etc.

Application:  

 
The parts are widely used in Main Applications: Heavy Mining | Mineral Processing | Sand and Gravel |Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | Secondary Grinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport |Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous (Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries | Large Particle Slurries | Sump Drainage | Wash down | Floor Drainage | Mixing | Iron Ore | Cooper | Diamond | Alumina | Coal | Gold | Kaolin | Phosphorite | Steel | Palm | Suger | Chemical | Power | FGD | Frac Sand Blending | Construction | City Sewage | etc.
 

WorkShop

We has own foundry workshop, Machining workshop, and Assembly workshop . As a result, Naipu Pump is able to ensure that clients save on costs.

Welcome to visit NaiPu

FAQ

1. What Products does naipu pump mainly produce? 

Naipu mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample. 

2. Is Naipu direct factory or trader? 

Naipu own mould factory, foundry workshop, Machining Workshop, and Assembly workshop. Welcome to visit Naipu factory anytime. 

3. The Min MQQ

The MQQ is one PCS spare parts. 

4. What information is required for quotes? 

If you need the spare parts, we need to know the parts Code and material. 

If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more details the better. 

Welcome to Contact Me

ShiJiaZhuang NaiPu Pump Co., Ltd
Contact person: Kitty Liu
86-1303265716
HangZhou, Headquarters
Add.: No. 368, Xihu (West Lake) Dis. North Road, HangZhou, ZheJiang Province, China

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Single China in Mbeya United Republic of Tanzania gear coupling falk near me Stage in Durg-Bhilainagar India hydax nylon gear coupling Sand Reclamation Solid Slurry Pump with top quality lowest price

Marine China in Denver United States gear tooth coupling price Rudder in Matola Mozambique gear coupling shop Propeller 100kw Azimuth Thruster for Fishing Boat with top quality lowest price

Marine China in Denver United States gear tooth coupling price Rudder in Matola Mozambique gear coupling shop Propeller 100kw Azimuth Thruster for Fishing Boat with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Marine Rudder Propeller 100KW Azimuth Thruster

The rudder propeller is one series of our products. We introduced the rudder propeller EPT from SCHOTTEL of Germany in 1986. And the products have been successfully installed, used and served on the ships. They are sailing in oceanic area of home and abroad. Rudder propeller is today used for all types and size of ships. We can provide with a series of specifications of Rudder propeller.

The propeller can be freely steered through 360 degrees around the stem. Therefore the Rudder propeller is a combined propulsion and steering unit, sothat the full thruster is available in any direction for the ship.
If the prime engine is EPT or hydraulic motor, the upper gearbox can be eliminated.
The EPT or hydraulic motor can be vertically mounted on the fixed flange and the power will be transmitted through a bevel gear in lower gearbox on to the propeller(L-drive).

The rudder propeller can be operated by mechanical, hydraulic or electric-hydraulic unit, and can be in activ service as main propulsion, auxiliary propulsion and dynamic positioning of the ship, which are usually used in tugs, puch boats, ferry boats and barges etc. Now the company is developing higher power RP to satisfy requirements from market.

There are three installation types: Transom installation, Well installation, Deck installation.

1. Well Installation Rudder Propeller

The well installation is especially for tugs, ferries, well station, floating dock and survey ships.
Our rudder propeller is mounted in the well. The stem length varieswith the requirement of the application. The top mounting plate of the well should, if at all possible, be above the waterline so that the Rudder Propeller can be installed and removed when the ship is floating.
Well installation varies with the distance between the Rudder Propeller and the diesel engine. When the engine room is very small, the Rudder Propeller can be near to the diesel engine and suitable for application in long-range transmission between diesel engine and rudder propeller.

2. Deck Installation Rudder Propeller

The deck installation is a complete propulsion package. It is a reliable and compact propulsion plant. The chassis carries the totally enclosed propulsion system. The power of the diesel engine is transmitted to the rudder propeller through an elastic coupling, a hydaulic cluth and a universal shaft. The chassis daily fuel tank and so on. Installation is fast and simple because they are essentially self-con-rained. Only to obtain thrust. The deck installation unit merely has to be mounted and bolted onto a foundation of deck. Rudder propeller is mounted at the rear chassis.

3. Transom Installation Rudder Propeller

Transom installation is one of the three installation types. It is used for ships and vessels whose space of engine room are smaller, such as floating cranes, mounting plate with sealing is fixed on the plate. That is, the upper of the Rudder propeller is fixed on the pinaxis, and the lower is clamped on the puching ring. When rleasing the thruster bearing, the propeller can easily be elevated backwards.

Specification of Marine Rudder Propeller

Type SRP12 SRP50/51 SRP100/103 SRP152/151 SRP300/151 SRP300/226 SRP300/300 SRP352/300
Input Power Kw/HP 45/61 100/135 210/285 300/400 255/347 350/476 480/650 490/666
Max Input Torque N.m 200 420 850 1675 2500 2050 2800 5200
Max Imput Speed r/min 2300 2500 2350 2000 1000 1800 1800 1000
Reduction Ratio 1.93 2.5 2.68 3.46 2.37 3.34 3.96 2.2
Propeller Dia.mm Max 500 822 950 1150 1150 1350 1550 1550
Min     700 900   1100 1250  
PAL Length mm Max 2250 2800 2800 4250 4400 4750 4750 4750
Min 350 875 980 1400 1400 1750 1750 2000
Weight KG 65 190 300 1370   2000 2100 3580
PAL per 100mm extension kg 8 9 20.4 40 40 40 40 40
PAL The length between the center line of transmission flange and the center line of the propeller
Type SRP45 SRP85 SRP138 SRP180 SRP226 SRP280 SRP310 SRP330
Input Power Kw/HP 100/135 210/285 260/354 340/462 350/476 480/650 580/783 620/843
Max Input Torque N.m 450 850 1380 1800 2260 2800 3070 3300
Max Imput Speed r/min 2500 2350 2000 1800 1800 1800 1800 1800
Reduction Ratio 2.5 2.68 3.01 3.46 3.34 3.96 3.718 4.04
Propeller Dia.mm Max 800 950 1100 1150 1350 1550 1550 1500
Min 500 700 9000 900 1100 1250 1250 1300
PAL Length mm Max 2800 2800 4250 4400 4750 4750 5000 5000
Min 875 980 1100 1100 1750 1750 1700 1700
Weight KG 190 400 1200 1450 2000 2100 2500 2800
PAL per 100mm extension kg 9 20.4 20.7 40 40 40 45 45
PAL The length between the center line of transmission flange and the center line of the propeller

Final Model and Specification based on the real situation of the vessels.

Marine Boat propeller and Thruster are available . 

Our Certification

Welcome to contact us talk about details if you are intereted in Azimuth Thruster, Boat Propellers, Bow thruster etc. Propulsion systems.
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Marine China in Denver United States gear tooth coupling price Rudder in Matola Mozambique gear coupling shop Propeller 100kw Azimuth Thruster for Fishing Boat with top quality lowest price

Factory China in Tirupati India skf gear coupling shop Price in Jabalpur India skf gear coupling near me Gold Washing Rotary Trommel, Sand Screening Machine with top quality lowest price

Factory China in Tirupati India skf gear coupling shop Price in Jabalpur India skf gear coupling near me Gold Washing Rotary Trommel, Sand Screening Machine with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

1.Application Fields of Sand Screening Machine :

Sand Screening Machine  is suitable for various properties of screening materials such as: sand gold mines, coal coke, lime and damp easily blocked material, the final size after screen (the biggest size: 100mm, the middle size: 10-50mm, the finest size: <=3mm).
The circular vibration screen is widely applied to the industries such as mining, building materials, thermal power plant, and chemical industry, etc.

1) Quarry: suitable for screening and classifying gravel, clay, mountain meal, sand, etc.

2) Coal Industry: suitable for screening and classifying lump coal, coal dust, coal washing, etc.

3) Chemical,: fertilizer industry etc.

4) Mineral-selecting Industry: suitable for grading and classifying lump, powder substance, etc.

5) Metallurgy, construction, building materials, abrasives, and other industries.

2.Introduction of Sand Screening Machine :

Sand Screening Machine  is lifted up by the rotation and aerated as it falls back down. This action is repeated with each revolution along the length of the drum. The finer material passes through the screen openings while the larger material tumbles towards its eventual exit at the rear of the drum.

3.Main Characteristics:

· Configured for economical & efficient classification, Screening and grading.

· Heavy duty trommel drum with lifters at the front to facilitate material break up.

· Screen replaceable for different mesh sizes.

· Multiple screen size

· Easily changed screen plates

· Largest processing capacity in the industry

· Unique screen design, result in higher capacities, longer screen life and no material clogging

· Heavy duty feed hopper and extension

· Discharge chute

· Gear drive mechanism

· Variable speed drive mechanism

4.Working Principle Sand Screening Machine :

Drum tilt device mounted on the frame, motor through a speed reducer and a roller device through a shaft coupling connected together, driving roller device around the axis of rotation, when the material enters the cylinder device, big size material is discharged through the outer edge of the roller screen, small size material is discharged by a cylinder end.

5.Technical Parameter List of Sand Screening Machine :

Model Capacity (t/h) Power (KW) Sieve Tube Diameter (mm) Sieve Tube Length (mm) Discharge Size (mm) Dimension (mm)    L*W*H Weight (KG)
GT1015 50 4 1000 1500 <3-10 3000*1400*2415 2200
GT1571 100 5.5 1000 2000 <3-10 3460*1400*2145 2800
GT1225 160 7.5 1200 2500 <3-10 4146*1600*2680 4200
GT1530 250 11 1500 3000 <3-10 4460*1900*2820 5100
GT1545 350 15 1500 4500 <3-10 5960*1900*3080 6000
GT1848 450 22 1800 4800 <3-10 6500*2300*4000 7500
GT2055 600 30 2000 5500 <3-10 7500*2500*4000 8600

 

6.Related Products:

7.Successful case:

 

8.Packing & Delivery:

 

9. About our factory:

ZheJiang Hengchang Mining Machinery Manufacturing Co., Ltd. is located in No.3 Chuangye Road. Xihu (West Lake) Dis. In dustrial Park. Xihu (West Lake) Dis. County. HangZhou City. ZheJiang Province. China.Our company is engaged in the mineral processing equipment research, development, design and production for many years history, has accumulated rich experience in design and production. Enterprise in mineral processing equipment industry has had a positive effect, set up the good reputation. And mainly the manufacture of the products like as Shaking table. Flotation equipment. Crushing equipment. Magnetic separator. Screening equipment. Classifying equipment. Agitation tank, Feeding equipment. Gravity separation equipment. Wet separation equipment. EPT chute. Saw-tooth wave jig and Diaphragm Jig. Grinding equipment. Ball mill. Slurry pump. Centrifugal pump, Conveying equipment.

We manufacture various types of mineral processing machinery and equipment according to our customers’ requirements. Our products are widely used for sorting gold, silver, copper, iron, tungsten,lead. zinc. tin. molybdenum, nickel, tantalum, niobium, manganese ore, coal, monazite, rutile,diamonds, other precious metals and precious metals mine, and for the flotation colored, black metal,precious metals and other minerals. And we have export qualifications, our products sell well all over the world for several years, especially exported to Brazil. India. Indonesia.South Africa. Somalia, Philippines. Malaysia. Sudan, Nigeria. Iran, Russia, Ghana. Kazakhstan Kyrgyzstan.Cambodia,Vietnam,Korea,Mongolia and other countries.

 

10. Our service:

 1.Pre-sale services:
 (1)Select equipment model;
 (2) Design and manufactLire products according to clients’ special requirement;
 (3)Train technical personnel for dients.

2.Services during the sale:
(1) Pre-check and accept products ahead of delivery;
(2)help clients to draft solving plans.

3. After-sale services:
(1) Assist dients to prepare for the first construction scheme;
(2)Install and debug the equipment;
(3) Train the first-line operators on site;

11. FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.not dealer.Direct factory sale makes price more competitive.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in EPT ,balance before shippment.
If you have another question, pls feel free to contact us as below:

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Factory China in Tirupati India skf gear coupling shop Price in Jabalpur India skf gear coupling near me Gold Washing Rotary Trommel, Sand Screening Machine with top quality lowest price

Hot China in Lilongwe Malawi maina gear coupling near me shop Sale in Solapur India elecon gear coupling manufacturer Animal Poultry Cattle Feed Food Pellet Extruder with top quality lowest price

Hot China in Lilongwe Malawi maina gear coupling near me shop Sale in Solapur India elecon gear coupling manufacturer Animal Poultry Cattle Feed Food Pellet Extruder with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Hot Sale Animal Poultry Cattle Feed Food Pellet Extruder
 

1.  Hot Sale Animal Poultry Cattle Feed Food Pellet Extruder :

  1. Widely applied product with mature EPT .
  2. The main driving adopts high-precision gear drive, so that the output is improved by about 20% when compared with that of belt drive.
  3. Imported high-quality bearing and oil seal are adopted to ensure efficient, stable and low-noise whole machine operation . the granulating room is equipped with air suction temperature reducing system .
  4. The feeder adopts variable-frequency and variable-speed motor to ensure the quality of discharged particles .
  5. Ring dies with multiple kinds of bore diameters are optional . and high-quality craft ring dies are adopted, so that the service life is long. The discharged particles are smooth and the quality is high .
  6. International advanced compensation type snakelike spring coupling has the propertied of novel and compact structure, high safety, low noise and low fault rate.
  7. Plus-size conditioner and jacket type conditioner are selectable to strength the particle conditioning effect.

2. Hot Sale Animal Poultry Cattle Feed Food Pellet Extruder Main Data:
 

Model SZLH320 SZLH350 SZLH400 SZLH420 SZLH508
Capacity 2-5T/H 1.5-8T/H 2-10T/H 3-12T/H 4-20T/H
Main Motor Power 37KW 55KW 75/90KW 110KW 132/160KW
Screw Feeder Power 0.55KW 0.75KW 0.75KW 1.5KW 1.5KW
Conditioner Power 2.2KW 2.2KW    2.2KW 5.5KW 7.5KW
Ring die inner diameter 320mm 350mm 400mm 420mm 508mm
Ring die rotational speed 305PRM 336PRM 307PRM 287PRM 287PRM
Roller outer diameter 140mm    165mm 190mm 206mm  /
Dimension 2300*1000*2100 mm 3200*1100*1700 mm 3200*1300*1900 mm 3500*1300*2800 mm 3500*1500*2900mm

Pellets  diameter: 2mm, 3mm, 4mm, 4.5mm, 5mm, 6mm, 8mm, 10mm
Pellets shaping rate:    ≥95%
Pellets stability in water:    ≥20Min
Noise:    ≤86dB(A)    ≤90dB(A)
Roller working temperature:    ≤85ºC
Steam working pressure:    0.1-0.4Mpa
Steam temperature:    130-150ºC

3. Hot Sale Animal Poultry Cattle Feed Food Pellet Extruder More Photos:

4. Hot Sale Animal Poultry Cattle Feed Food Pellet Extruder Delivery Photos :

5. Hot Sale Animal Poultry Cattle Feed Food Pellet Extruder Customer Factory :

Any more information you need Hot Sale Animal Poultry Cattle Feed Food Pellet Extruder , please feel free to contact with us.
 
Mrs. Winni
ZheJiang Xihu (West Lake) Dis.ng Machinery & Equipment Company
Website:
Add: 4-6-88, No. 319 of Haier Road in Xihu (West Lake) Dis. District, ZheJiang Municipality, ZheJiang , China
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Hot China in Lilongwe Malawi maina gear coupling near me shop Sale in Solapur India elecon gear coupling manufacturer Animal Poultry Cattle Feed Food Pellet Extruder with top quality lowest price

Full China in Samut Prakan Thailand elecon gear coupling factory Automatic in Uvira Democratic Republic of the Congo sier bath gear coupling shop Animal Poultry Cattle Feed Production Machine Line with top quality lowest price

Full China in Samut Prakan Thailand elecon gear coupling factory Automatic in Uvira Democratic Republic of the Congo sier bath gear coupling shop Animal Poultry Cattle Feed Production Machine Line with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Full Automatic Animal Poultry Cattle Feed Production Machine Line

1.Full Automatic Animal Poultry Cattle Feed Production Machine Line description :

  1. Widely applied product with mature EPT .
  2. The main driving adopts high-precision gear drive, so that the output is improved by about 20% when compared with that of belt drive.
  3. Imported high-quality bearing and oil seal are adopted to ensure efficient, stable and low-noise whole machine operation . the granulating room is equipped with air suction temperature reducing system .
  4. The feeder adopts variable-frequency and variable-speed motor to ensure the quality of discharged particles .
  5. Ring dies with multiple kinds of bore diameters are optional . and high-quality craft ring dies are adopted, so that the service life is long. The discharged particles are smooth and the quality is high .
  6. International advanced compensation type snakelike spring coupling has the propertied of novel and compact structure, high safety, low noise and low fault rate.
  7. Plus-size conditioner and jacket type conditioner are selectable to strength the particle conditioning effect.

Poultry Feed Pellet Mill  photo :

2. Full Automatic Animal Poultry Cattle Feed Production Machine Line Technical Parameter:
 

Model SZLH320 SZLH350 SZLH400 SZLH420 SZLH508
Capacity 2-5T/H 1.5-8T/H 2-10T/H 3-12T/H 4-20T/H
Main Motor Power 37KW 55KW 75/90KW 110KW 132/160KW
Screw Feeder Power 0.55KW 0.75KW 0.75KW 1.5KW 1.5KW
Conditioner Power 2.2KW 2.2KW    2.2KW 5.5KW 7.5KW
Ring die inner diameter 320mm 350mm 400mm 420mm 508mm
Ring die rotational speed 305PRM 336PRM 307PRM 287PRM 287PRM
Roller outer diameter 140mm    165mm 190mm 206mm  /
Dimension 2300*1000*2100 mm 3200*1100*1700 mm 3200*1300*1900 mm 3500*1300*2800 mm 3500*1500*2900mm

Pellets  diameter: 2mm, 3mm, 4mm, 4.5mm, 5mm, 6mm, 8mm, 10mm
Pellets shaping rate:    ≥95%
Pellets stability in water:    ≥20Min
Noise:    ≤86dB(A)    ≤90dB(A)
Roller working temperature:    ≤85ºC
Steam working pressure:    0.1-0.4Mpa
Steam temperature:    130-150ºC

3. Feed Mill Photos:

Inner Parts Photos:

Machine In Workshop :

More Details of Animal Feed Pellet Mill:

Final Feed Photos:

Any more information you Full Automatic Animal Poultry Cattle Feed Production Machine Line,  please feel free to contact with us.
 
Mr. Jason
ZheJiang Xihu (West Lake) Dis.ng Machinery & Equipment Company
Website: http://qiaoxingmachinery.en.made-in-china.com
Add: Room 6088, Building 4th, No. 319 of Haier Road in Xihu (West Lake) Dis. District, ZheJiang Municipality, ZheJiang , China
Mobile :0086-15178920906
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Full China in Samut Prakan Thailand elecon gear coupling factory Automatic in Uvira Democratic Republic of the Congo sier bath gear coupling shop Animal Poultry Cattle Feed Production Machine Line with top quality lowest price