We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Brief introduction
Honey is a sweet, viscous food substance produced by bees and some related insects. Over its history as a food, the main uses of honey are in cooking, baking, desserts, such as mel i mató, as a spread on bread, as an addition to various beverages, such as tea, and as a sweetener in some commercial beverages. Honey barbecue and honey mustardare other common flavors used in sauces.
Honey processing is a simple food processing industry, and there is no stereotyped equipment. The honey room is designed according to the capacity requirement and the temperature index. Honey production line equipment includes honey tanks, storage tanks, reaction tanks, honey pipes, valves, filters and transfer pumps. YL offers its stainless steel lobe pump to transfer honey.
Why YL pump for your honey
–Non-contacting pumphead design enhances the pump’s ability to handle abrasive crystalline slurries, whilst minimising product damage.
–Low running, super low shear feeding do damage to your yogurt and keep its good taste.
–Suitable for CIP and SIP.
–Low maintenance costs with easy access to the pumphead minimising downtime, results in a reduced lifecycle cost.
–Lower power requirements than other pump technologies
Pump Working principle
The even rotation of the rotor pair creates a vacuum on the priming side of the pump, which can be defined by the direction of rotation of the drive. This vacuum draws the liquid into the pump chamber. With further rotation, the pumped medium is conveyed past the pump wall into the pressure area. Up to six chamber charges are displaced with each drive rotation depending on the rotor type. When the rotor is at a standstill, the pump seals off almost completely.
Pump Structure
Complete pump consists of bare shaft pump, coupling& shield, gear reduer with motor and baseplate. You can only have our bare shaft pump.
Pump Specifications
|
Model |
Displace-ment (L/r) |
Speed range (r/min) |
Capacity |
Max. (Mpa) |
Power (Kw) |
Suction pressure (Mpa) |
Inlet &outlet (mm) |
Max. (cp) |
|
25BV12-2 |
0.15 |
20-600 |
0.09-4.32 |
1.2 |
2.2 |
-0.02~-0.08 |
25 |
1000000 |
|
40BV12-5 |
0.32 |
20-550 |
0.18-7.92 |
1.2 |
4 |
-0.02~-0.08 |
40 |
1000000 |
|
50BV12-8 |
0.47 |
20-550 |
0.28-12.4 |
1.2 |
5.5 |
-0.02~-0.08 |
50 |
1000000 |
|
50BV12-10 |
0.65 |
20-550 |
0.39-17.16 |
1.2 |
7.5 |
-0.02~-0.08 |
50 |
1000000 |
|
65BV12-20 |
1.74 |
20-550 |
1.04-45.94 |
1.2 |
15 |
-0.02~-0.08 |
65 |
1000000 |
|
80BV12-30 |
2.5 |
20-550 |
1.5-66.00 |
1.2 |
22 |
-0.02~-0.08 |
80 |
1000000 |
|
80BV12-40 |
3.65 |
20-550 |
2.19-96.00 |
1.2 |
30 |
-0.02~-0.08 |
80 |
1000000 |
|
125BV12-50 |
4.6 |
20-420 |
2.76-92.74 |
1.2 |
37 |
-0.02~-0.08 |
125 |
1000000 |
|
125BV12-70 |
6.1 |
20-420 |
3.66-122.98 |
1.2 |
45 |
-0.02~-0.08 |
125 |
1000000 |
|
125BV12-80 |
7.0 |
20-420 |
4.20-141.12 |
1.2 |
55 |
-0.02~-0.08 |
125 |
1000000 |
|
150BV12-100 |
11.4 |
20-420 |
6.84-229.82 |
1.2 |
75 |
-0.02~-0.08 |
150 |
1000000 |
|
150BV12-150 |
12.5 |
20-420 |
7.50-252.00 |
1.2 |
90 |
-0.02~-0.08 |
150 |
1000000 |
|
175BV12-200 |
16.7 |
20-420 |
10.02-336.67 |
1.2 |
110 |
-0.02~-0.08 |
175 |
1000000 |
Note*
1. Tested medium: water. Your liquid’s density, viscosity and temperature are necessary to supply when choose the pump.
2. Speed, flow rate, EPT power and pressure will be varified according to different liquid properties.
3. Port size can be changed as needed.
4. YL reserves the right to change specifications without prior notification.
Pump details to show
How to choose our pump
Dear Customer,
To ensure satisfactory performance of required pumps, it is important that the pump must be properly selected. Below table is for your selection guideline, which is nessary to supply us for a targeted solution and offer.
| Selection Xihu (West Lake) Dis.line | |||
| Buyer information | |||
| Company name | Contact person | ||
| Website | |||
| Address | Mobile No. | ||
| Tel/Fax: 0086-571-88220971 No. | Online chat ID. | ||
| Liquid information | |||
| Your industry: __________ Liquid name:___________ | |||
| Features: Sanitary[ ] Corrosive[ ] Poisonous[ ] | |||
| Viscosity:_______cp Density:_______ Temperature:_____ºC PH value:________ | |||
| Solid content:_______ Max. size of particle:_______ | |||
| Using condition | |||
| Capacity: Max. required:__________ L/H Working required:__________ L/H | |||
| Discharge pressure: Max. required:__________Mpa Working required:__________ Mpa | |||
| Suction pressure: Max. required:__________Mpa Working required:____________ Mpa | |||
| Delivery head required:____________ Vacuum:________ Mpa | |||
| Heating jacket required: Yes[ ] No.[ ] Heating temp.:_____ºC | |||
| Liquid inlet/outlet direction: Horizontal[ ] vertical[ ] | |||
| Pipe size: Inlet___________ Outlet____________ | |||
| Connection type required: Flange[ ] Thread[ ] Clamp[ ] | |||
| Installation type: Fixed [ ] Movable[ ] | |||
| Operating status: Continuous[ ] Interruption[ ] | |||
| Liquid contact material: SS304[ ] 316[ ] 316L[ ] Others________ | |||
| Special request_____________________________________ | |||
Factory workshop showing
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
