Product Description
Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc CHINAMFG Flex Rigid Drive Shaft NM yox Fluid Jaw Flexible Chain Gear Couplings
Manufacturer of Couplings, Fluid Coupling, JAW Coupling, can interchange and replacement of lovejoy coupling and so on.
A coupling can interchange and replacement of lovejoy coupling is a device used to connect 2 shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join 2 pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.
Coupling is a jaw type coupling that works for a variety of light duty to heavy duty motors used in electric power transmission.
This is 1 of our safest types of products. The reason being that these couplings work even when the elastomer fails and there is no metal to metal contact.
They perform in well-standing oil, grease, moisture, sand, and dirt and nearly 850,000 bore combinations that can be customised as per the customer’s needs.
They are used in light-weight, medium, or heavy electrical motors and devices for power transmission through internal combustion.
Production workshop:
Company information:
Diagnosing and Troubleshooting Cardan Coupling Issues
Diagnosing and troubleshooting issues related to cardan couplings in machinery systems involves a systematic approach:
- Visual Inspection: Examine the cardan coupling for signs of wear, damage, misalignment, or corrosion. Look for any unusual noises or vibrations.
- Check Lubrication: Inspect the lubrication system and ensure proper lubricant levels. Inadequate lubrication can lead to premature wear.
- Monitor Performance: Use sensors and monitoring systems to track the performance of the cardan coupling in real-time. Analyze data for anomalies.
- Measure Alignment: Check for proper alignment between the input and output shafts. Misalignment can lead to increased wear and reduced efficiency.
- Check for Unusual Noises: Listen for any unusual noises during operation, such as grinding, squeaking, or knocking sounds.
- Inspect Components: Examine the individual components of the cardan coupling, including the universal joints and shafts, for signs of wear or damage.
- Perform Load Analysis: Evaluate the operating conditions and loads to ensure they are within the specified limits of the cardan coupling.
- Review Maintenance Records: Refer to maintenance records to ensure that the cardan coupling has been properly maintained and serviced.
- Consult Manufacturer Guidelines: Follow the manufacturer’s guidelines for troubleshooting and diagnostics specific to the cardan coupling model.
By following these steps, operators and maintenance personnel can effectively diagnose and troubleshoot cardan coupling issues, ensuring the reliable and efficient operation of machinery systems.
Handling High Torque and Axial Displacement with Cardan Couplings
Cardan couplings, also known as universal joints or u-joints, are designed to transmit torque between two shafts that are not in a straight line. They are versatile components commonly used in various applications, including those requiring high torque and axial displacement.
Handling High Torque: Cardan couplings are capable of handling high levels of torque transmission due to their robust design and construction. The design allows for torque to be transmitted through a series of interconnected components, including the cross-shaped yokes and the bearing assemblies. The use of high-strength materials and precision manufacturing techniques contributes to the coupling’s ability to transmit torque efficiently.
Handling Axial Displacement: While cardan couplings are primarily designed for accommodating angular misalignment, they can also handle a certain degree of axial displacement. Axial displacement refers to the movement of the connected shafts along their axis. However, the axial displacement capacity of a cardan coupling is limited compared to its ability to handle angular misalignment.
It’s important to note that excessive torque or axial displacement beyond the coupling’s design limits can lead to premature wear, increased vibrations, and reduced performance. Manufacturers provide specifications and guidelines for the maximum torque and axial displacement that a specific cardan coupling can handle. Engineers and designers should adhere to these specifications to ensure optimal performance and longevity of the coupling in their applications.
What are the key features and benefits of using a cardan coupling?
Cardan couplings, also known as universal joints or U-joints, offer several key features and benefits that make them valuable components in various mechanical systems:
- Angular Misalignment Compensation: One of the primary features of cardan couplings is their ability to accommodate angular misalignment between shafts. This flexibility allows them to transmit torque even when the input and output shafts are not collinear.
- Torque Transmission: Cardan couplings are effective in transmitting torque between shafts at an angle. They can handle both small and moderate torque loads, making them suitable for a wide range of applications.
- Compact Design: The simple and compact design of cardan couplings makes them easy to integrate into various mechanical systems without requiring excessive space.
- Cost-Effective Solution: Cardan couplings provide a cost-effective solution for transmitting torque in cases of angular misalignment. Their straightforward design and manufacturing process contribute to their affordability.
- High-Speed Transmission: Cardan couplings can handle high rotational speeds, making them suitable for applications where rapid motion and torque transmission are required.
- Versatility: These couplings find applications in diverse industries, including automotive, industrial machinery, agriculture, and aerospace, due to their ability to compensate for misalignment and transmit torque effectively.
- Reduced Vibrations: In some cases, cardan couplings can help dampen vibrations and shocks that may occur due to misalignment, contributing to smoother operation.
- Simple Maintenance: Maintenance of cardan couplings typically involves lubrication of the bearing and regular inspection for wear and tear. This maintenance process is relatively straightforward and can extend the component’s lifespan.
- Easy Replacement: If a cardan coupling needs to be replaced due to wear or failure, its simple design makes the replacement process relatively quick and uncomplicated.
Overall, the key features and benefits of using cardan couplings make them an attractive choice for applications where torque transmission and angular misalignment compensation are necessary.
editor by CX 2023-11-27
China Custom Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc Curved Tooth Flex Rigid Drive Shaft Nm Yox Fluid Jaw Flexible Chain Gear Couplings
Product Description
Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc CHINAMFG Flex Rigid Drive Shaft NM yox Fluid Jaw Flexible Chain Gear Couplings
Manufacturer of Couplings, Fluid Coupling, JAW Coupling, can interchange and replacement of lovejoy coupling and so on.
A coupling can interchange and replacement of lovejoy coupling is a device used to connect 2 shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join 2 pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.
Coupling is a jaw type coupling that works for a variety of light duty to heavy duty motors used in electric power transmission.
This is 1 of our safest types of products. The reason being that these couplings work even when the elastomer fails and there is no metal to metal contact.
They perform in well-standing oil, grease, moisture, sand, and dirt and nearly 850,000 bore combinations that can be customised as per the customer’s needs.
They are used in light-weight, medium, or heavy electrical motors and devices for power transmission through internal combustion.
Production workshop:
Company information:
Maintenance Practices for Ensuring Cardan Coupling Reliability
To ensure the reliability of cardan couplings, the following maintenance practices are crucial:
- Lubrication: Regularly inspect and maintain the lubrication system. Ensure proper lubricant levels and use lubricants recommended by the manufacturer.
- Alignment: Maintain proper alignment between the input and output shafts. Misalignment can lead to premature wear and reduced efficiency.
- Regular Inspections: Perform visual inspections to detect signs of wear, damage, or corrosion. Regular inspections can help identify issues before they become major problems.
- Monitoring: Use sensors and monitoring systems to track the performance of the cardan coupling. Monitor temperature, vibration, and other parameters for anomalies.
- Torque Analysis: Analyze the torque requirements of the machinery system to ensure that the cardan coupling can handle the load without exceeding its limits.
- Periodic Maintenance: Follow the manufacturer’s recommended maintenance schedule. This may include replacing worn components, lubricant changes, and alignment adjustments.
- Record Keeping: Maintain detailed maintenance records, including inspection dates, lubrication schedules, and any repairs performed.
- Training: Ensure that maintenance personnel are trained to properly inspect, maintain, and troubleshoot cardan couplings.
By implementing these maintenance practices, operators can extend the lifespan of cardan couplings, prevent unexpected failures, and optimize the performance of machinery systems.
Challenges and Alignment of Cardan Couplings
Cardan couplings, while capable of accommodating angular misalignment, can pose certain challenges related to alignment. Here’s an overview of these challenges and how they can be addressed:
1. Angular Misalignment Limit: Cardan couplings have a limit to the amount of angular misalignment they can accommodate without causing excessive wear and vibration. It’s essential to stay within the manufacturer’s specified misalignment range.
2. Precision Assembly: Assembling a cardan coupling requires precision to ensure that the yokes and spider are aligned correctly. Misaligned assembly can lead to premature wear and increased vibrations.
3. Balancing and Vibration: Cardan couplings can introduce imbalances due to their design. Imbalances can result in vibration and reduce the overall efficiency of the system.
4. Lubrication: Adequate lubrication is crucial to minimize friction and wear in the bearings of the spider. Poor lubrication can lead to increased heat generation and accelerated wear.
5. Maintenance: Regular maintenance is required to monitor the condition of the coupling, including checking for wear, misalignment, and any signs of damage.
6. Torque Fluctuation: In applications with significant angular misalignment, cardan couplings may experience torque fluctuations due to the changing angles of the shafts.
To address these challenges:
– Follow the manufacturer’s guidelines for installation, alignment, and maintenance.
– Use precision tools and techniques during assembly to ensure proper alignment.
– Balance the rotating components to minimize vibration.
– Maintain proper lubrication to reduce friction and wear.
– Periodically inspect the coupling for wear, misalignment, and signs of damage.
– Consider using flexible couplings with higher misalignment capabilities for applications with extreme misalignment requirements.
Proper alignment, maintenance, and adherence to manufacturer recommendations can help maximize the efficiency and longevity of cardan couplings in mechanical systems.
Are there different types of cardan couplings for various applications?
Yes, there are different types of cardan couplings designed to suit various applications and requirements:
- Single Universal Joint: This is the most common type of cardan coupling, consisting of two yokes connected by a cross-shaped center piece. It is suitable for applications where angular misalignment compensation is needed, but the shafts are not too far apart.
- Double Cardan Joint: Also known as a double U-joint or CV joint, this type consists of two universal joints connected by an intermediate shaft. It is used when higher angles of misalignment need to be accommodated or when a constant velocity transmission is required.
- Disc Type Coupling: This type uses flexible discs or plates to transmit torque and compensate for misalignment. It is often used in applications with limited space and moderate torque requirements.
- Block Type Coupling: Block type cardan couplings use solid blocks or spheres to transmit torque. They are suitable for heavy-duty applications and can handle higher torque loads.
- Floating Shaft Coupling: This design involves two shafts connected by a third floating shaft, which allows for even higher angles of misalignment and smoother torque transmission.
- Needle Bearing Universal Joint: In this type, needle bearings are used to reduce friction and improve efficiency. It is often used in precision applications where low friction and high efficiency are crucial.
The choice of cardan coupling type depends on factors such as the amount of misalignment, torque requirements, available space, and the need for constant velocity transmission. Selecting the right type ensures optimal performance and longevity in various mechanical systems.
editor by CX 2023-11-07
China Good quality Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc Curved Tooth Flex Rigid Drive Shaft Nm Yox Fluid Jaw Flexible Chain Gear Couplings
Product Description
Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc CZPT Flex Rigid Drive Shaft NM yox Fluid Jaw Flexible Chain Gear Couplings
Manufacturer of Couplings, Fluid Coupling, JAW Coupling, can interchange and replacement of lovejoy coupling and so on.
A coupling can interchange and replacement of lovejoy coupling is a device used to connect 2 shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join 2 pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.
Coupling is a jaw type coupling that works for a variety of light duty to heavy duty motors used in electric power transmission.
This is 1 of our safest types of products. The reason being that these couplings work even when the elastomer fails and there is no metal to metal contact.
They perform in well-standing oil, grease, moisture, sand, and dirt and nearly 850,000 bore combinations that can be customised as per the customer’s needs.
They are used in light-weight, medium, or heavy electrical motors and devices for power transmission through internal combustion.
Production workshop:
Company information:
Recent Technological Advancements in Cardan Coupling Design
In recent years, there have been notable advancements and innovations in the design of cardan couplings:
- Material Enhancements: Advances in materials science have led to the development of high-strength and lightweight materials that can improve the performance and durability of cardan couplings.
- Sealing Technology: Improved sealing mechanisms and materials help prevent contamination and enhance the lifespan of cardan couplings.
- Computer-Aided Design (CAD): CAD software allows for more precise and optimized design of cardan couplings, leading to better performance and reduced stress concentrations.
- Finite Element Analysis (FEA): FEA techniques enable engineers to simulate the behavior of cardan couplings under various loads and conditions, aiding in design optimization.
- Lubrication Systems: Innovations in lubrication systems ensure efficient and consistent lubrication, reducing wear and enhancing coupling longevity.
- Monitoring and Diagnostics: Integration of sensors and monitoring systems enables real-time data collection for performance analysis, predictive maintenance, and early detection of issues.
- Customization: Advanced manufacturing techniques allow for more customization, making it possible to design cardan couplings tailored to specific applications.
These advancements contribute to the overall efficiency, reliability, and performance of cardan couplings, making them more suitable for a wide range of applications.
Handling High Torque and Axial Displacement with Cardan Couplings
Cardan couplings, also known as universal joints or u-joints, are designed to transmit torque between two shafts that are not in a straight line. They are versatile components commonly used in various applications, including those requiring high torque and axial displacement.
Handling High Torque: Cardan couplings are capable of handling high levels of torque transmission due to their robust design and construction. The design allows for torque to be transmitted through a series of interconnected components, including the cross-shaped yokes and the bearing assemblies. The use of high-strength materials and precision manufacturing techniques contributes to the coupling’s ability to transmit torque efficiently.
Handling Axial Displacement: While cardan couplings are primarily designed for accommodating angular misalignment, they can also handle a certain degree of axial displacement. Axial displacement refers to the movement of the connected shafts along their axis. However, the axial displacement capacity of a cardan coupling is limited compared to its ability to handle angular misalignment.
It’s important to note that excessive torque or axial displacement beyond the coupling’s design limits can lead to premature wear, increased vibrations, and reduced performance. Manufacturers provide specifications and guidelines for the maximum torque and axial displacement that a specific cardan coupling can handle. Engineers and designers should adhere to these specifications to ensure optimal performance and longevity of the coupling in their applications.
Factors to Consider When Selecting a Cardan Coupling for Specific Applications
Choosing the right cardan coupling for a specific application requires careful consideration of various factors:
- Torque and Power Transmission: Determine the required torque and power capacity of the coupling to ensure it can handle the intended load without exceeding its limits.
- Angular Misalignment: Assess the level of angular misalignment that might occur between the connected shafts and choose a coupling that can accommodate it without causing excessive wear or vibration.
- Operating Speed: Consider the rotational speed of the shafts to ensure that the coupling’s design can handle the desired speed without causing issues like resonance or fatigue.
- Environmental Conditions: Evaluate the operating environment, including factors like temperature, humidity, and exposure to contaminants, to select a coupling made from materials that can withstand these conditions.
- Shaft Sizes and Types: Measure the diameter and type of shafts that need to be connected and choose a coupling with compatible dimensions and attachment methods.
- Space Constraints: Consider the available space for the coupling within the machinery and select a compact design that fits without causing interference.
- Maintenance Requirements: Evaluate the maintenance practices and frequency that will be feasible for your application and choose a coupling that aligns with those requirements.
- Cost and Budget: Factor in the cost of the coupling and its potential impact on your budget while ensuring that the chosen coupling meets your performance needs.
- Shock and Vibration: Determine if the application involves high levels of shock or vibration and select a coupling that can absorb or mitigate these forces to prevent premature failure.
- Life Cycle and Reliability: Consider the expected lifespan of the machinery and choose a coupling that offers the desired level of durability and reliability.
By carefully considering these factors, you can select the most suitable cardan coupling for your specific application, ensuring optimal performance and longevity.
editor by CX 2023-08-11
China manufacturer Ngcl Drum Gear Coupling capacitive coupling
Product Description
NGCL Drum Gear Coupling With Brake Wheel
NGCL Drum Gear Coupling With Brake Wheel is a drum gear coupling. It has a brake wheel, which can control the rotation speed of the machine by controlling the speed of the brake wheel. NGCL Drum Gear Coupling With Brake Wheel allows greater angular displacement, can improve the tooth contact conditions, and improve the ability to transfer torque, prolong the service life, with angular displacement along the contact state of gear width, consisting of inner gear and the same number of teeth of the flange half band coupling parts etc..
NGCL Drum Gear Coupling With Brake Wheel need to work in good and sealed conditions. NGCL Drum Gear Coupling With Brake Wheel has the same radial size and large bearing capacity as the toothed coupling. It is commonly used for shafting transmission under low speed and heavy load conditions. The high accuracy and dynamic balancing gear coupling can be used for high speed transmission.
·NGCL Drum Gear Coupling Main Dimension And Parameter(JB/ZQ4644-1997)
| Type |
Nominal torque (kn·m) |
Allow speed (R/min) |
Shaft hole diameter | Shaft hole length | D0 | D | D1 | D2 | C | C1 | H | B | B1 | B2 | B3 | Weight | Rotary inertia Kg.m2 |
||
| dZ | d1,d2 | Y | J1type | ||||||||||||||||
| NGCL1 | 355 | 4000 | 20-35 | 20,22,24 | 52 | 38 | 160 | 103 | 71 | 50 | 30 | 8 | 2 | 56 | 42 | 38 | 68 | 7 | 0.07 |
| NGCL2 | 630 | 4000 | 25-45 | 25,28 | 62 | 44 | 160 | 115 | 83 | 60 | 36 | 8 | 2 | 68 | 48 | 42 | 68 | 9 | 0.079 |
| NGCL3 | 1000 | 3800 | 30-55 | 28 | 62 | 44 | 200 | 127 | 95 | 75 | 41 | 8 | 2 | 70 | 49 | 42 | 85 | 14.6 | 0.181 |
| NGCL4 | 1600 | 3800 | 40-65 | 38 | 82 | 60 | 200 | 149 | 116 | 90 | 41 | 8 | 2 | 74 | 53 | 42 | 85 | 18.6 | 0.225 |
| NGCL5 | 2800 | 3000 | 45-75 | 40,42,45 | 112 | 84 | 250 | 167 | 134 | 105 | 48 | 8 | 2.5 | 84 | 58 | 42 | 105 | 31.8 | 0.58 |
| NGCL6 | 4500 | 3000 | 50-90 | 60,63,65 | 142 | 107 | 250 | 187 | 153 | 125 | 49 | 9 | 2.5 | 85 | 59 | 42 | 105 | 38.5 | 0.754 |
| NGCL7 | 6300 | 2400 | 60-100 | 80,85,90 | 172 | 132 | 315 | 204 | 170 | 140 | 53 | 9 | 2.5 | 93 | 63 | 42 | 132 | 61.8 | 1.299 |
| NGCL8 | 9000 | 1900 | 70-110 | 100,110 | 212 | 167 | 400 | 230 | 186 | 155 | 64 | 12 | 3 | 112 | 77 | 47 | 168 | 108 | 4.072 |
| NGCL9 | 14000 | 1500 | 80-130 | 130 | 252 | 202 | 500 | 256 | 212 | 180 | 71 | 13 | 3 | 119 | 80 | 47 | 210 | 167 | 10.109 |
| NGCL10 | 20000 | 1200 | 80-150 | 130,140, 150 |
252 | 202 | 630 | 287 | 239 | 200 | 65 | 15 | 3.5 | 120 | 90 | 47 | 265 | 237 | 29.248 |
| NGCL11 | 31500 | 1050 | 100-170 | 160,170 | 302 | 242 | 710 | 325 | 276 | 235 | 77 | 16 | 3.5 | 134 | 94 | 47 | 298 | 357 | 47.08 |
| NGCL12 | 45000 | 1050 | 100-200 | 190,200 | 352 | 282 | 710 | 362 | 313 | 270 | 94 | 17 | 4 | 164 | 104 | 49 | 298 | 464 | 53.69 |
| NGCL13 | 63000 | 950 | 150-220 | 200,220 | 352 | 282 | 800 | 412 | 350 | 300 | 88 | 18 | 4.5 | 165 | 113 | 49 | 335 | 596 | 86.67 |
| NGCL14 | 1000000 | 950 | 170-220 | 240,250 | 410 | 330 | 800 | 462 | 420 | 335 | 92 | 20 | 5.5 | 209 | 157 | 63 | 335 | 785 | 105.9 |
♦Product Show
♦Other Products List
| Transmission Machinery Parts Name |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Company
HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
♦Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.
5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.
♦FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.
Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.
Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.
Q 9: What’s your payment?
A:1) T/T.
♦Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | 19-32 |
| Torque: | >80N.M |
| Bore Diameter: | 19mm |
| Speed: | 4000r/M |
| Structure: | Rigid |
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Types of Couplings
A coupling is a device that connects two shafts together. It transmits power from one end to another and is used for joining rotating equipment. A coupling is flexible and can accommodate a certain amount of end movement and misalignment. This allows for more flexibility in applications. Various types of couplings are available, and each one serves a specific purpose.
Shaft couplings
There are many types of shaft couplings, and they are used in a wide range of applications. The type you need depends on the torque, speed, and horsepower you need, as well as the size of the shaft and its spatial limitations. You may also need to consider whether the coupling will accommodate misalignment.
Some shaft couplings are flexible, while others are rigid. Flexible couplings can accommodate up to two degrees of misalignment. They are available in different materials, including aluminum, stainless steel, and titanium. They can also be known by different names, depending on the industry. Some couplings can also be used in a single or multiple-shaft application.
The first type of shaft coupling is a rigid coupling, which consists of two parts that fit together tightly around the shafts. These couplings are designed to have more flexibility than sleeved models, and they can be used on fixed shafts as well. The flanged coupling, on the other hand, is designed for heavy loads and is made of two perpendicular flanges. The flanges are large enough to accommodate screws and are generally used with heavy-duty applications.
CZPT shaft couplings are a great choice if you’re looking for a shaft coupling that delivers high performance, durability, and low cost. These metal disc-style couplings provide low backlash and high torsional stiffness. Their high misalignment tolerance reduces reaction loads on connected components, which makes them ideal for high-speed precision applications. Available in single and double-disc models, they have torque ratings of up to 2,200 in-lbs. (250N) and are available in fourteen sizes.
When using shaft couplings, it is important to choose the right type for your application. Backlash can cause a shaft coupling to break or become unusable. In order to prevent this from happening, you should replace worn or loose parts, and ensure that the hub and key are evenly positioned with the shaft. If you’re using a shaft coupling in a motion-control system, it is important to keep the torque level consistent.
Flexible couplings
Flexible couplings are a type of coupling used to connect two shafts. They are made of rubber or plastic and allow for axial movement of the connected equipment. They do not require lubrication and are resistant to fatigue failure. Flexible couplings are useful for a number of applications. A common type of flexible coupling is the gear coupling, which has gear teeth inside its sleeve. Another type of flexible coupling is the metallic membrane coupling. A metallic membrane coupling is flexible due to flexing metallic discs.
One major disadvantage of flexible couplings is their inability to fit certain types of pipe. This is because most couplings need to be stretched to fit the pipe. This problem is often the result of a change in pipe technology. Traditionally, drain and soil pipe is made of ductile iron or cast iron. Today, most pipes are made of PVC, which has a larger outside diameter than either cast or ductile iron. Because of these changes in pipe technology, many coupling manufacturers have not updated their mold sizing.
Flexible couplings can be either metallic, elastomeric, or a combination of the three. While there are some common characteristics of each type, you should always consider the tradeoffs of each type before choosing one. Generally, the most important considerations when selecting a flexible coupling are torque, misalignment, and ease of assembly and maintenance.
Flexible couplings are used in a wide range of industries. They are useful for connecting two pipes to ensure torque transfer. Although the types available are different, these are the most adaptable couplings in the market. They can withstand movement, vibration, and bending without causing any damage to the piping.
Clutch couplings
A clutch coupling connects two rotating shafts by friction. The clutch engages power when the engine is running, disengaging power when the brake is applied. Clutch couplings are used in applications where the speed of a machine is variable or where continuous service is required. The clutch can transmit power, torque, and axial force.
Clutch couplings come in a variety of styles and configurations. Some couplings are flexible, while others are rigid. Flexible couplings are available in a variety of materials, including stainless steel and aluminum. Some couplings also have a non-backlash design, which helps compensate for misalignment.
Clutch couplings may be synchronous or asynchronous. Synchronous couplings engage and disengage automatically when the driven machine exceeds its output speed. These couplings are synchronized by a synchronizing mechanism. When the output speed is exceeded, the synchronizing mechanism initiates the engagement process. The synchronizing mechanism does not engage or disengage when the output speed drops.
High speed clutches are available from a variety of manufacturers. Some manufacturers offer OEM assembly, repair services, and third-party logistics. These manufacturers serve the automotive, chemical, food, and wood industries, as well as the oilfield and material handling industries. Custom clutches can be manufactured for specific applications and can be fitted with additional features, such as precision machined teeth or keyway slots and grooves.
Couplings are available in PCE, C/T, and metric bores. Typically, the size of the input and output shafts will determine which type of coupling is needed. In addition, clutches may be configured for intermediate or high speeds, depending on the required torque.
Clamped couplings
Clamped couplings are commonly used in a variety of industries. They can be used in medical equipment, dental equipment, military equipment, laboratory equipment, and in precision industrial controls. They are available in a wide variety of sizes and keyways. This type of coupling offers a number of advantages, including ease of installation and quick and easy replacement.
A clamp coupling connects two parts by compressing them together. The clamping elements can be formed in a variety of ways, but they all have a gap between their surfaces. This friction squeezes the two parts together, much like pulling two rubber gloves apart. This type of coupling is also useful for joining two hoses or piping units.
Clamped couplings are designed with a single or double clamping shaft. The clamping parts are mounted in two halves and are held together by eight socket head cap screws. They offer high torque capacity and require little installation space. Their high rigidity ensures good positioning accuracy, making them ideal for dynamic drives. In addition, they are wear-free and offer simple radial assembly.
The invention relates to a method and system for clamping pipes to a tank vessel. This invention also relates to a method of loading and unloading tank vessels. The method can be used in oil production platforms and other platforms. A single point mooring method is also used in oil production platforms.
Clamped couplings can also be flexible. They can join two shafts together while allowing a small amount of end movement and misalignment. These couplings may also be used in the assembly of motors and gearboxes.
CZPT’s coupling
CZPT couplings are designed to be flexible, allowing them to accommodate misaligned shafts and transmit torque in either direction. They are made with three discs, two hubs, and a center that are arranged with grooves and fins. These features allow for two degrees of freedom during assembly, and can accommodate misalignment of up to 5% of the shaft diameter.
CZPT couplings have many uses. For example, they can be used to join two parallel coaxial rotating shafts. Their ability to transmit torque at the same rotation mechanism and speed makes them ideal for applications where electrical currents may be a problem. Because the couplings are not made of metal, they are electrically isolated. Designers should test their couplings during the prototype stage to ensure they are working properly.
The CZPT coupling consists of two hubs with one slot on each. An intermediate disk is located between the two hubs. The discs are used to reduce or prevent wear on other machine parts. CZPT couplings are inexpensive and easy to replace. They also have electrical insulation, which makes them easy to repair or replace.
CZPT couplings are a popular choice for stepper motor-driven positioning stages. The plastic center disc offers electrical isolation and absorbs shocks from frequent start/stops. These couplings are available in through-hub and blind-bore styles and can be installed in many applications.
CZPT couplings also allow for small degrees of shaft misalignment. This allows them to function in systems where shaft access is limited. They are easily removed without tools.
editor by CX 2023-07-13
M28-65 Cheap made in China – replacement parts – in Aracaju Brazil Nylon Gear Sleeve, Nylon Gear Coupling Nylon Gear Shaft Coupling with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
M28-sixty five Nylon Equipment Sleeve, Nylon Equipment Coupling Nylon Gear Shaft Coupling
1. Applies to versatile generate shaft ,enabling a greater axial radial displacement and displacement.
2. Has a easy structure,easy servicing .
three. Disassembly easy
four. minimal sound
five. Transmission effectiveness loss,long helpful functioning lifestyle.
| Advantages: |
| one. Lowe EPT pice dependent on huge scale manufacturing. |
| two. High and secure top quality degree. |
| three. Widely employed in different mechanical and hydraulic fields. |
| 4. Compensation for axial,radial and angular misalignment. |
| 5. Convenient axial plugging assembly. |
| 6. No brittlement at minimal temperature. |
| 7. Good slippery and frictional qualities. |
| 8. Resistance to chemical corrosion. |
Area: as your need
Substance: steel / aluminum / brass / iron / zinc / alloy
Any EPT material and dimension is dependent on customers’ desire.
Utilization: equipment / home furniture / toy / woodboard / wall
EPT method: Precision turning components
Euipment: CNC turning device
Tests gear: projector
Tolerance:+/-.05MM
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
normal dimension for polyurethane coupling:
GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180
GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS55, GS65, GS75, GS90, GS100, GS110, GS125, GS140, GS160, GS180
MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13
ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13
MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/95, L99/a hundred, L110, L150, L190, L225, L276
FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R
T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210
normal dimensions for rubber coupling:
Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/95, L99/a hundred, L110, L150, L190, L225
NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265
Equipment 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J
special dimensions develop molding according to the buyer’s drawings
normal dimensions for nylon coupling:
NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10
unique dimension build molding in accordance to the buyer’s drawings
***when you enquiry, p EPT affirm product’s amount and amount***
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For much more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique tools manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our firm and the listed replacement components contained herein are not sponsored, approved, or produced by the OEM.
Extension China in Bujumbura Burundi full gear coupling sales Universal in Belfast United Kingdom fenner grid coupling shop Joint with top quality lowest price
We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
and its products include Universal Joint,Transmission shaft and yokes etc.,Which are sold in more than 20provinces in China,and many foreign countries,in
USA,Mexico,Russia,Brazil,Spain,India,Japan,Italy,Germany Etc.
Where is transmission needed, there is YHK
EPT main products: alloy steel roller chain, conveyor chain, agricultural chain, elevator chain, stainless steel chain, automobile chain, sprocket, Plastic Chain Belt, Engineered Plastics Chain Xihu (West Lake) Dis., Snow Chain, Saw chain, Lifting Chain, Locking devices, Timing pulleys, Synchronous Belt, V-Belt pulleys, Couplings, Rack&Gear, Mounted Ball Bearing Units, Bearings, Reducer&Motor, bolts.
Products provided by EPT are widely used in railway, mine, oil, machinery, metallurgy, paper making, textile, printing and dyeing, electricity, machine, chemical industry, medical equipment, aviation and other industries.
Professional sales engineers and technicians offer professional product consultation and technical solution to solve customer’s difficult fast and accurate.
Detailed product category, please see “Product Centre”–“Industry Category”(PDF type).
To create superior value for our customers, shareholders, and partners is our goal.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
Factory China in Busto Arsizio Italy brake drum gear coupling shop Direct in Novosibirsk Russian Federation sier bath gear coupling factory Sale Chain Sprocket with top quality lowest price
We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Product specification
1.Material:C 45# steel ,stainless steel or other required materials.
2.Sprockets can be made according the customer’s drawings
3.Heat treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on according the requirements..
4. Inspection: All items are checked and tested thoroughly during every working procedure and after production will be reinspected.
About us
HangZhou Jumai Sprocket Co., Ltd. is a professional manufacturer of various sprocket wheels, stainless steel sprocket wheels, non-standard sprocket wheels, large pitch sprocket wheels, coupling sprocket wheels, spur gears, timing belt wheels, gear racks, umbrella Gear, worm gear, shaft, sleeve and other transmission parts manufacturers. And according to customer drawings, samples, size processing custom production. The company integrates design R & D, manufacturing and sales. In accordance with strict production, inspection and quality standards, the company has established a comprehensive quality system, production process and perfect quality control. The company’s sprocket products are of high quality, stability and durability.
The company now has 80 sets of various high-precision CNC lathes, gear hobbing machines, gear shapers, tempering furnaces, quenching equipment, gantry planers, universal milling, sawing machines, vertical broaching machines, hydraulic machines and other processing equipment, with an annual production capacity of 2 million pieces . Carburizing and quenching, nitriding, quenching and other heat treatment, surface blackening, galvanizing, electrophoresis, etc. At the same time, it also has high-precision testing equipment such as: Rockwell hardness tester, Vickers hardness tester, metallographic microscope, image measuring instrument, Magnetic particle flaw detectors, etc. The products produced are widely used in metallurgy, steel, chemical, textile, agricultural machinery, three-dimensional garages, packaging machinery, chemical machinery, pharmaceutical machinery, industrial and mining machinery and other industries. The product indicators meet the requirements of importing similar products and are exported to Hong Kong and ZheJiang , Southeast Asia, Europe, America, the Middle East and other regions, and are deeply trusted and praised by customers.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment 30%TT in advance. 70% T/T before shippment.
Q:What`s the MOQ of your products?
A:1 set,we can also deal with the sample order. and the large-quantity.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
Sp1540 China in Londrina Brazil falk 1025g20 sales High in Mecca Saudi Arabia boston gear coupling manufacturer Rigidity Heavy Cutting Double Column Machining Center with top quality lowest price
We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Product Overview
For this series column and beam fixed double column machining center, we adopt international dynamic rigidity design idea and optimize the moving parts on the basic of high rigidity,structure symmetry,high stability of traditional double column machining center. This series machines have the characteristic of high torque and fast feedback, which can meet the demand of auto,mould,aviation,military industrial and other mechanical machining field. This series machines are mainly made of base,worktable,columns,beam,saddle,hydraulic system,lubrication system,cooling and filtering system,chip device, CNC system and other parts.
spindle part
Belt type spindle is economic, it is with pneumatic tool clamping and unclamping;
Gear head type is with higher rigidity, better for heavy cutting compared with belt type;
Direct driven spindle
- Spindle motor directly connects to spindle through high quality carbon fiber coupling.
- Cooling thermal-protective coating of main motor
- High torque high rigidity MAYR carbon fiber coupling (Tks=975Nm), which helps to fulfill the nice performance of main motor as overturn torque is much reduced.
Counter weight system- Double hydraulic cylinders
- Z axis with balance counterweight system ( double balance cylinder + hydraulic station ) to improve Z axis stability and positioning accuracy.
- Hydraulic station not only provide power source for balance cylinder, but also for tool clamping and unclamping.
Double balance cylinder can efficiently decrease bending moment during Z axis movement.
axes driving
Directly coupled servo motor
- The ball screws are directly coupled to the servo motor. It will express mostly motor performance and improve machine accuracy and efficiency.
- 10 years free service reducer STOBER in X \Z axes (Germany brand).
Spindle box
- With large cross section design, it improve spindle box rigidity by 20% compared with other competitors.
- SINO spindle box thickness is 345mm, usually competitors’ is just 60mm.
Saddle
1. To improve saddle rigidity and anti-shock, Z axis is made of box guideway with plastic which is manually scraped well.
2. One piece of screw nut seat and saddle to improve machine accuracy
Beam
Reasonable distance between guideway to spindle center by FEA
Base
- Foundation hole keep in vertical line with linear guideway which assure a better loading support.
- If machine is installed by two holes, one fixing hole and one adjusting hole, the machine base is easily deformed due to unequal force.
- Trapezoid foundation hole ensure machine stability.
- 500mm distance between two holes keep reasonable equal force.
imported configuration
Machine Parameters
About SINO
Established in 1928, Sino Machinery Co., Ltd, is a factory which specializes in
developing, manufacturing and selling of various types of conventional milling machines,CNC
milling machines and machining centers. Currently we have more than 500 employees.Among
them, there are 180 Professional technicians, 30 quality inspector. We introduced advanced
processing equipment and talented personnel, 95% of machine functional parts are applied with
famous ZheJiang brand and nice testing equipment secure the machine’s good stability and excellent
performance. Thus, We sino machine are enjoying good reputation home and abroad.
Our Services
What we can do for you?
1.Reply your inquiry in 24 working hours.(our normal working time:6:00~22:00)
2.Experienced staffs answer all your questions in time.
3.Customized design is available.
4.Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5.Special discount and protection of sales are provided to our distributor.
6.Professional factory: We are manufacturer, specializing in producing all kinds of CNC MACHINING CENTER.
7. As an honest seller, we always use superior raw material, advanced processing/testing machines,
skilled technicians to ensure our products to be finished in high quality and stable feature.
If the above model is not suitable for your workpiece, please tell us your need and then we can
send you the most satisfying drawing.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
Supply China in Campinas Brazil floating shaft gear coupling factory Installation in Bareilly India flexible gear coupling near me shop Service Steel Rolling Mill with top quality lowest price
We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
The function of 135m finishing mill group
The finishing mill group is composed of top crossed 45° High-speed wire-rod finishing mills.
The finishing mill group is located in high-speed wire-rod workshop. Through 10 unit rack the continuous micro-tension rolling mill will be transported upstream Æ 17 ~ Æ 21mm of rolling, rolling become Æ 5.5 ~ Æ 16mm finished wire. The working speed of 90m/s is insured. The specification of end product is Æ 5.5mm.
Structural characteristics of finishing mill
Finishing mill unit is combined with ten mills, speed increasing box, support base, arc coupling, waterproof slot, waterproof plate, the protective cover, piping and guide of finishing mill. Mill frame is composed of three 200mills and seven 150 mills, frame use top crossed 45 composition form to achieve no twisting, no contact axis, little axis and shock for equipment, besides, it decrease the center of gravity height, the stability increased as well, in the mean time, the total weigh has decrease and it is easy to maintain. Ten frames are concentrated transmission.
Roll frame is composed of roller box, bevel gearbox and spare parts of bevel gearbox.
Roller box and bevel gearbox adopt outside combinational instruction, decrease the size of bevel gearbox to decrease the weight of finishing mill, decrease the space of mills to make their structure compact. Roller box used cantilever roll loop, there is eccentric locking collar in the box to adjust roll gap. Film bearing and roll shaft are inside eccentric locking collar, taper sleeve is used to fix roll loop which is in the end of roll shaft.
Bevel gearbox is composed of box, transmission box, EPT bevel gear roll and synchronized gears. All gears are hardened grinding gear, geartooth correction is needed. The accuracy level of EPT bevel gearbox is six and round bevel gearbox is five to insure the smooth working of high speed.
Roller box and bevel gearbox are connected by bolts, a part of roller box plug into the bevel gearbox to let two synchronized gears in bevel gearbox meshed. Roller box and bevel gearbox are fixed by two locating pin, the roller box with same specification can be changed.
The axial force of the roll shaft beared by a pair of thrust ball bearings, this ball bearing mounted on the axial clearance in the absence of the resilient washer, because the very small axial clearance ball itself, therefore the roll shaft to accurately positioned in the axial direction, which ensures accurate roll rolling precision, which is to ensure the dimensional accuracy of the workpiece.
The roller shaft near the film bearing is designed in the form with taper, so the roller shaft can bear uniform load distribution even it is bend. So the lifetime of roller can be improved.
The adjustment of roll gap is to rotate feed screw with left and right thread and nut. When the two eccentric rotated relatively, the distance of two rollers changed with the symmetrical eccentric relative movement of eccentric locking collar, so the location of former roller line and guide can be maintain.
Roller loop is tungsten carbide, it is connected on the cantilever roll shaft, we use the specific hydraulic changing roll equipment to replace roll loop, it is convenient and easy.
| Material specification | Æ17~21mm |
| Material temperature | >900ºC |
| Produce specification | Æ5.5~16mm |
| The kinds of rolling steel | Carbon steel, low alloy steel, high alloy steel, high-quality carbon structural steel |
| Speed of the exit of tenth frame | 75m/s |
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
Drying China in Curitiba Brazil flexible gear coupling shop Equipment in Port-au-Prince Haiti rexnord gear coupling price Mining Machinery Rotary Kiln with top quality lowest price
We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Large size Mineral processing wet ball mill
Ball Mill is the key equipment for grinding materials to get the product as per the requirement of process, used widely in electric, ferrous (non-ferrous) metal, nonmetal mining, chemical & building material industries.
Mill could be sorted as following:
As per the grinding media:ball mill, rod mill and AG mill (without grinding media)
As per material discharging mode: wet grinding mill, dry grinding mill & overflow mill.
As per driving mode:side & central driving. The former is more popular now.
As per driving configuration:
a. Asynchronous motor driving: Asynchronous motor + Reducer + Pinion + Girth gear
b. Synchronous motor driving: Synchronous motor + Air clutch +Pinion + Girth gear
c. Asynchronous motor + reducer +diaphragm coupling
Main bearing: adopting slide bearing, rolling bearing or sliding-shoe-bearing as per requirement.
Liner: adopting wear-resistant metal liner, rubber liner, magnetic liner and alumina liner (high aluminum lining brick).
Following items as per options: inching driving device, high & low pressure lubrication station, spraying lubrication device of gear, jacking device & PLC control system.
Technical parameters of overflow wet ball mill :
| Model | Cylinder | Feed size (mm) | Max. ball Loading (t) |
Speed (r/min) |
Capacity(t/h) | Discharging size (mm) |
Main Motor (KW) |
Weight (t) | |
| Diameter (mm) | Length (mm) |
||||||||
| MQY-0918 | 900 | 1800 | ≤20 | 1.5 | 36-38 | 0.65-2 | 0.075-0.89 | 18.5 | 4.6 |
| MQY-0930 | 900 | 3000 | ≤20 | 2.7 | 36 | 1.1-3.5 | 0.075-0.89 | 22 | 6.7 |
| MQY-1224 | 1200 | 2400 | ≤25 | 3 | 36 | 1.5-4.8 | 0.075-0.6 | 30 | 11.9 |
| MQY-1230 | 1200 | 3000 | ≤25 | 3.5 | 36 | 1.6-5 | 0.074-0.4 | 37 | 12.8 |
| MQY-1245 | 1200 | 4500 | ≤25 | 5 | 32.4 | 1.6-5.8 | 0.074-0.4 | 55 | 13.8 |
| MQY-1530 | 1500 | 3000 | ≤25 | 7.5 | 30 | 2.8-6.3 | 0.074-0.4 | 75 | 18 |
| MQY-1545 | 1500 | 4500 | ≤25 | 11 | 30 | 3.8-9 | 0.074-0.4 | 110 | 21 |
| MQY-1830 | 1830 | 3000 | ≤25 | 11.5 | 26.6 | 4.5-12.5 | 0.074-0.4 | 130 | 33 |
| WQY-1845 | 1830 | 4500 | ≤25 | 15 | 26.8 | 6-15.5 | 0.074-0.4 | 155 | 35.5 |
| MQY-2130 | 2100 | 3000 | ≤25 | 15 | 23.8 | 5.8-18 | 0.074-0.4 | 155 | 43 |
| MQY-2136 | 2100 | 3600 | ≤25 | 18 | 23.8 | 6.8-22 | 0.074-0.4 | 180 | 47 |
| MQY-2145 | 2100 | 4500 | ≤25 | 24 | 23.8 | 8-25 | 0.074-0.4 | 245 | 54 |
| MQY-2230 | 2200 | 3000 | ≤25 | 18 | 21.3 | 6.9-23 | 0.074-0.4 | 180 | 48 |
| MQY-2245 | 2200 | 4500 | ≤25 | 27 | 21.3 | 8.5-26.8 | 0.074-0.4 | 280 | 52 |
| MQY-2430 | 2400 | 3000 | ≤25 | 23 | 21.3 | 7-26 | 0.074-0.4 | 245 | 51 |
| MQY-2436 | 2400 | 3600 | ≤25 | 26 | 21.3 | 8.8-33.5 | 0.074-0.4 | 280 | 58 |
| MQY-2445 | 2400 | 4500 | ≤25 | 30 | 21.6 | 11-42 | 0.074-0.4 | 320 | 69 |
| MQY-2460 | 2400 | 6000 | ≤25 | 44 | 21.7 | 14.5-56 | 0.074-0.4 | 480 | 78 |
| MQY-2736 | 2700 | 3600 | ≤25 | 33 | 20.7 | 11.7-54 | 0.074-0.4 | 400 | 86 |
| MQY2740 | 2700 | 4000 | ≤25 | 38 | 20.7 | 13-60 | 0.074-0.4 | 450 | 92 |
| MQY-2745 | 2700 | 4500 | ≤25 | 43 | 20.7 | 14.5-67.5 | 0.074-0.4 | 480 | 98 |
| MQY-2750 | 2700 | 5000 | ≤25 | 48 | 20.6 | 16-75 | 0.074-0.4 | 500 | 106 |
| MQY-2760 | 2700 | 6000 | ≤25 | 57 | 20.6 | 19.5-90 | 0.074-0.4 | 630 | 116 |
| MQY-3040 | 3000 | 4000 | ≤25 | 47 | 19 | 16.5-78 | 0.074-0.4 | 500 | 108 |
| MQY-3064 | 3000 | 6400 | ≤25 | 74 | 19 | 26-125 | 0.074-0.4 | 800 | 138 |
| MQY-3245 | 3200 | 4500 | ≤25 | 59 | 18.2 | 21.6-95 | 0.074-0.4 | 630 | 126 |
| MQY-3254 | 3200 | 5400 | ≤25 | 73 | 18.2 | 25.9-114 | 0.074-0.4 | 800 | 138 |
| MQY-3270 | 3200 | 7000 | ≤25 | 93 | 18.2 | 30.2-148 | 0.074-0.4 | 1250 | 150 |
| MQY-3645 | 3600 | 4500 | ≤25 | 75 | 18 | 24.3-136 | 0.074-0.4 | 1000 | 144 |
| MQY-3650 | 3600 | 5000 | ≤25 | 86 | 18 | 28.1-151 | 0.074-0.4 | 1250 | 152 |
| MQY-3660 | 3600 | 6000 | ≤25 | 102 | 18 | 32.4-181 | 0.074-0.4 | 1250 | 163 |
| MQY-3685 | 3600 | 8500 | ≤25 | 131 | 18 | 45.8-256 | 0.074-0.4 | 1800 | 252 |
| MQY-3867 | 3800 | 6700 | ≤25 | 130 | 17.4 | 40-230 | 0.074-0.4 | 1600 | 185.2 |
| MQY-4060 | 4000 | 6000 | ≤25 | 126 | 16.9 | 40.5-226 | 0.074-0.4 | 1500 | 203 |
| MQY-4067 | 4000 | 6700 | ≤25 | 136 | 16.9 | 45-252 | 0.074-0.4 | 1600 | 206 |
| MQY-4361 | 4270 | 6100 | ≤25 | 144 | 15.7 | 46-258 | 0.074-0.4 | 1850 | 215 |
| MQY-4564 | 4500 | 6400 | ≤25 | 172 | 15.6 | 54-306 | 0.074-0.4 | 2000 | 280 |
| MQY-5064 | 5030 | 6400 | ≤25 | 216 | 14.4 | 68-386 | 0.074-0.4 | 2600 | 320 |
| MQY-5083 | 5030 | 8300 | ≤25 | 266 | 14.4 | 88-500 | 0.074-0.4 | 3300 | 403 |
| MQY-5565 | 5500 | 6500 | ≤25 | 264 | 13.8 | 95-550 | 0.074-0.4 | 4500 | 451.5 |
| MQY-5585 | 5500 | 8500 | ≤25 | 335 | 13.8 | 108-615 | 0.074-0.4 | 4500 | 525 |
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/