July 28, 2020

Cycloidal pinwheel reducer is a up-dated of brand-new type transmissing machine designed with K-H-V less teeth engagement and the cycloidal pin steering wheel clenching mechanism, which are widely used in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical task machinery etc, Industry, conveyors and cranes. various fields.

1. Equipment is made from high power low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is used for all good contact performance, gears and with great precision
2. high transmission efficiency: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service existence and high bearing potential;
5. convenient to assemble, disassemble and check.

Operation specifications and precautions
1.High modularization design: various equip with various motor or other power type conveniently.Same machine type may equip with various power motor. It is easy to realize the combination and
junction between every machine type.
2.Transmission ratio: great division, wide scope. The combined equipment type may form very large transmission ratio, i.e. result suprisingly low rotary speed.
3.Form of unit installation: the position to be installed is not limited.
4.High strength, small: the box body is constructed of large strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and good grinding process, which means bearing potential of unitvolume is great.
5.Long life: Beneath the condition of accurate type chosen (including choosing ideal operation parameters)normal procedure and maintenance, the life span of main parts of speed reducer (except dressed in parts) shouldn’t be significantly less than 20000 hours. The using parts include lubricating essential oil seal, bearing and essential oil.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is usually low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High quickness ratio and efficiency
Single stage transmission may reach to at least one 1:87 of speed-downward ratio and the efficiency is more than 90%. If employ multi-speed drive the speed-down ratio is definitely bigger.
2. Compact
Being adapted epicyclic transmission theory, the input and productivity shaft are at same axis centre, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can understand high reduction ratio system.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are involved simultaneously, and there are two gears engaged with 180 degree symmetry. So, the influence of tooth pitch mistake and cumulative tooth pitch error on the rotation accuracy is relatively average, which makes the position precision and rotation accuracy reach an extremely high level.
4. Less parts, convenient installation
The three basic components achieve a high deceleration ratio, and they are all on the same axis, so the kit is simple to install and easy to shape.
5. Small in proportions and light in weight
Compared with the previous gear device, the quantity is 1/3, the fat is 1/2, but can obtain the same torque capacity and reduction ratio, achieving small lightweight.
6 High torque capacity
Flexible wheel materials USES particular steel with high fatigue strength.Not the same as ordinary transmission gadget, the number of teeth meshing makes up about in regards to 30% of the total number of teeth. Furthermore, it is in get in touch with with the surface, so that the pressure borne by each gear is reduced and huge torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the energy loss due to friction. Therefore, high reduction ratio may be accomplished while maintaining high efficiency, and miniaturization of generating motor could be realized.
8. Low noise
The gear meshing cycle velocity is low, the transmission movement force balance, therefore the operation is quiet, and the vibration is very small.
◆Great speed ratio and high efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission can be used, the deceleration ratio will come to be larger.
◆Because planetary transmission principle is adopted, the type shaft and outcome shaft are on a single axis line, so that the machine version can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is much larger, and the mechanism of balancing machine parts creates the vibration and voice limited by a minimum.
◆Reliable use and prolonged service life for the reason that primary parts are made from substantial carbon chromium steel, substantial strength is definitely obtained by quenching (HRC58-62), and rolling friction is utilized in some transmission contacts, so the service life is lengthy.
Cycloid reducer is normally a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has many advantages, versatile, and can be both positive and negative operation.

•Big ratio, and substantial efficiency Smooth operation,

• low noise The utilization of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically zero wear, durable.

• Compact structure,

• small size Because the utilization of a planetary transmitting, the insight shaft and the result shaft on a single axis, making the model to obtain the smallest possible size.

• Reasonable design, easy repair, and break down easily install,

• minimal number of parts along with straightforward lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion carrier, precision and improve the output strength.

(2).Hoop clamp coupling have five connection ways suited to different application environments.

(3).Size over PL/PF120(including)precision and high power integral inner gear casing, processed in a single station,which remove the cumulative mistake and assembling error of split type.Eliminate casting process;adopt incredibly hot of forging process, that will decrease the blank material defects.

(4).The meshing gear adopt shaving process after carburizing and quenching,which better to make gear area smooth and high accuracy,decrease the temperature rising due to gear surface gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its functionality and mounting dime nsions conform the same sorts of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, compact structure, radiate heat efficiently, beautiful shape and low noise.
Great sealing and adaptability.Its blend with T gear reducer and MB/MBN variator may meet all types of speed requirement.